
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X160-20B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X160-20B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 160 mm stroke that an external stop screw trims by up to 20 mm on site, giving a usable extend range of 140-160 mm. As a rule of thumb, plan for about 3682 N of real work at 0.5 MPa rather than the full rating. The B code gives a male rod thread on the 25 mm rod, and the air port is 1/4" PT.
The hard-anodized aluminium body with an S45C hard-chrome-plated rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this heavy-thrust actuator still fits tight press fixtures and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi). No magnet is fitted on this version; order the -S code if you later need CMSE or DMSE switch sensing.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X160-20B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
If 6135.9 N is far more than the job needs, drop to the 100 mm bore and save air consumption. Remember the stop screw only shortens the extend stroke within the 20 mm window and is a mechanical end stop, not a mid-stroke lock: on air loss the piston still drifts, so add a separate holding valve where a load must stay put. FA flange or LB foot mounts bolt to the ISO 21287 face, and the male rod thread suits rod knuckles such as the I or Y types.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -20 code is a 20 mm adjustment window: an external stop screw shortens the 160 mm extend stroke on site, so the usable range is 140-160 mm. It cannot lengthen the stroke past 160 mm, and the stop is an end stop only - it never holds a load if air is lost. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is 1/4" PT.
It is an ISO 21287 compact cylinder: hard-anodized aluminium body, S45C carbon-steel rod with hard-chrome plating, threaded aluminium covers, and a fixed TPU bumper at both ends that only decelerates the piston at the ends of travel. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder. This version has no magnet, so no switch can be mounted; ordering the optional -S magnet code enables CMSE or DMSE reed or solid-state switches. Mounting options include FA flange and LB foot, and the male rod thread (B code) accepts I or Y rod knuckles.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.