
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X25-10B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 25mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder with an adjustable extend stroke, the ACEJ125X25-10B pairs a 125 mm bore with a short 25 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, placing it in the heaviest force class of the ACEJ range. The external stop screw trims the extend stroke by up to 10 mm on site, so the usable extend range is 15-25 mm without changing hardware.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 6 kN actuator must fit inside a tight press fixture or guard. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the optional -S magnet enables CMSE / DMSE switches when ordered.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X25-10B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Ejecting castings or stampings from a die needs high force over a tiny distance; the 25 mm stroke with a 10 mm trim window matches exactly.
A body about 50% shorter than an ISO 15552 profile cylinder lets this 125 mm bore clamp inside compact weld or assembly gantries.
Choose ACEJ125X25-10B when you need the full 6135.9 N and only 15-25 mm of extend travel. The stop screw is a mechanical end stop for the extend stroke, not a mid-stroke lock, so on air loss the piston still drifts and an external brake is needed to hold a load. Mount with FA flange or LB foot brackets, and add the -S code if CMSE / DMSE position sensing is planned.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -10 code sets a 10 mm adjustment window: an external stop screw shortens the 25 mm extend stroke on site, giving a usable range of 15-25 mm. It cannot lengthen the stroke past 25 mm, and the stop is not a load-holding brake.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a hard-anodized aluminium body, S45C hard-chrome rod, 1/4" PT ports and fixed TPU bumpers at both ends. FA flange and LB foot mounting bolt to the standard ISO 21287 face. Position sensing requires the optional -S magnet; this model has no magnet, so CMSE / DMSE switches can only be used if you order the -S version.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.