
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X250-50B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 250mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
The ACEJ125X250-50B is a double acting AirTAC compact cylinder built to ISO 21287, with a 125 mm bore and a 250 mm stroke that an external stop screw can trim by up to 50 mm on site, giving a usable extend range of 200-250 mm. At 0.5 MPa it pushes with 6135.9 N and pulls with 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa. The male rod thread (B code) on the 25 mm rod bolts straight into tooling plates and knuckle links.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters when a 250 mm stroke press or clamp must fit inside a guarded machine frame. Air supply is 0.15-1.0 MPa (22-145 psi), speed range 30-500 mm/s, and a fixed TPU bumper sits at both ends.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X250-50B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 250 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×250 | Stroke length in mm. |
| -50 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Pull force of 5890.5 N at 0.5 MPa retracts loaded steel slides and machine gates on foundry conveyors, with the male rod thread tying into clevis-style knuckles.
If the full 250 mm stroke is always used, the fixed-stroke ACE125X250B is simpler; choose this -50 version when final stroke length must be set during commissioning. The adjuster is a mechanical end stop only, so on air loss the piston still drifts and it never holds a load. FA flange or LB foot mounts and I/Y rod knuckles fit the ISO 21287 face; the optional -S magnet is required for CMSE / DMSE switches and is not fitted on this code.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N and pull to 8246.7 N, with a theoretical maximum of 1251.4 kgf at 1.0 MPa. The -50 code gives a 50 mm adjustment window: the external stop screw shortens the 250 mm extend stroke to any length from 200 to 250 mm. It is a mechanical end stop, not a mid-stroke lock, so the piston still drifts if air is lost.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated 25 mm rod, threaded aluminium covers and a fixed TPU bumper at each end; the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. Ports are 1/4" (PT thread on this code). Sensors need the optional -S magnet code, which allows CMSE / DMSE switches; this model has no S, so no magnet is fitted and no sensor can be read. FA flange and LB foot mounts plus I/Y knuckles bolt to the standard face.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.