
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X275-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Its ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 275 mm stroke fits presses and gantries where a full-length cylinder will not. An external stop screw trims the extend stroke anywhere in the ordered 30 mm window, giving a usable range of 245-275 mm on site.
The hard-anodized aluminium body carries a 25 mm S45C hard-chrome-plated rod with a male thread (the B code), and 1/4" ports feed air filtered to 40 um at 0.15-1.0 MPa (22-145 psi). Fixed TPU bumpers at both ends absorb end-of-stroke energy while speeds run 30-500 mm/s. Note the stop screw is an end stop only: on air loss the piston still drifts, so it never holds a load.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X275-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
In warehouse baling equipment the 125 mm bore ejects compressed cardboard or plastic bales, and the compact body slots into the ejector frame where an ISO 15552 profile cylinder is simply too long.
If 275 mm is more travel than the machine needs, the same bore in a shorter stroke with a wider -50 or -100 window gives more trimming freedom. Mount via FA flange or LB foot on the ISO 21287 face, with I/Y rod knuckles for the male-threaded rod. This unit has no magnet; if you need CMSE or DMSE switch position feedback, order the -S variant instead.
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
The -30 code is a 30 mm adjustment window: an external stop screw shortens the 275 mm extend stroke by up to 30 mm, so the working range is 245-275 mm. It shortens the stroke only - it cannot extend past 275 mm, and it is an end stop, not a mid-stroke lock, so the piston still drifts if air is lost. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, a 25 mm hard-chrome-plated S45C male-threaded rod (the B code) and 1/4" ports. Fixed TPU bumpers at both ends absorb end-of-stroke impact. The body is about 50% shorter in mounting length than an ISO 15552 profile cylinder of the same stroke. This model has no magnet fitted; to run CMSE or DMSE reed or solid-state switches you must order the -S version, which adds the optional magnet. Mounting options include FA flange and LB foot.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.