
The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X30-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 30mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
A double acting ISO 21287 compact cylinder with a trimmable extend stroke, the ACEJ125X30-30B pairs a 125 mm bore with a short 30 mm travel and a male rod thread on its 25 mm rod. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N, rising to 8590.3 N on the extend stroke at 0.7 MPa, with a theoretical ceiling of 1251.4 kgf at 1.0 MPa. The external stop screw lets you shorten the extend stroke anywhere inside the ordered 30 mm window on site, so one cylinder serves several fixture positions.
The hard-anodized aluminium body with an S45C hard-chrome rod takes up roughly half the mounting length of an ISO 15552 profile cylinder, which is why this bore class fits inside heavy clamping rigs and press frames that cannot spare the depth. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and a fixed TPU bumper sits at both ends. Note that no magnet is fitted unless you order the optional -S code.
| Model | Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X30-30B |
|---|---|
| Series | ACEJ compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
| ACEJ | ISO 21287 compact cylinder (adjustable-stroke). |
|---|---|
| 125 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -30 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Clamps cast ingots on a machining line; the short body fits between the fixture plates where a full-length profile cylinder would not reach.
Presses strapping heads down on 300 kg loads with margin, using the LB foot mount on the transfer table frame.
The stop screw only shortens the extend stroke and acts as an end stop, not a mid-stroke lock, so on air loss the piston can still drift - do not rely on it to hold a suspended load.
Mount FA flange or LB foot brackets on the ISO 21287 face and add I or Y rod knuckles for side misalignment. If you need position feedback, order the -S variant so CMSE / DMSE switches can ride the body slots; the PT port here is 1/4".
AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder
Quick checklist
At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N, and the theoretical maximum is 1251.4 kgf at 1.0 MPa. The -30 code is a 30 mm adjustment window: an external stop screw shortens the 30 mm extend stroke by up to 30 mm on site, giving a usable range of 0-30 mm. It is an end stop only - it never locks or brakes the load, and the piston drifts if air is lost.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into deep-die and gantry spaces. A fixed TPU bumper decelerates the piston at both ends. FA flange, LB foot and FTC brackets plus I/Y rod knuckles bolt straight on. Position sensing needs the optional -S magnet code - without it no magnet is fitted and CMSE / DMSE switches cannot be used. Rod end here is male thread (B code) and the port is 1/4" PT.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.