verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC ACEJ Series · ISO 21287 Compact Cylinder

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B

The AirTAC ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B is a genuine double acting, double rod, adjustable stroke ISO 21287 compact air cylinder with a Ø125mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.

  • BoreØ125 mm
  • Stroke90 mm
  • Port size1/4"
  • Acting typeDouble acting, double rod, adjustable stroke
  • Rod threadM16×2.0
  • CushionFixed TPU bumper (both ends)
$217.11 $235.45Save 7% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every ACEJ125 stroke, adjustment, mounting and version on one page All ACEJ125 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B

The ACEJ125X90-30B is a double acting ISO 21287 compact cylinder with a 125 mm bore and a 90 mm stroke that an external stop screw trims by up to 30 mm on site, giving a usable extend range of 60-90 mm. At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push rises to 8590.3 N.

The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 125 mm bore fits deep press frames and gantry rails where a full-length body cannot. A fixed TPU bumper at both ends absorbs end-of-stroke shock, the S45C hard-chrome 25 mm rod resists wear, and the male rod thread (B code) bolts straight to standard tooling. Note that the stop screw is a mechanical end stop only: on air loss the piston still drifts, so it never holds a load.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B Technical Specifications

ModelAirtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B
SeriesACEJ compact cylinder
StandardISO 21287
Bore sizeØ125 mm
Stroke90 mm
Acting typeDouble acting, double rod, adjustable stroke
Port size1/4"
Rod threadM16×2.0
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed TPU bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.

Theoretical Output Force (Ø125mm)

PressureForce (both ways)
0.5 MPa5890 N
0.7 MPa8247 N
Max (@1.0 MPa)1201 kgf

ACEJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).

Model Code: Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B

ACEJISO 21287 compact cylinder (adjustable-stroke).
125Bore size in mm.
×90Stroke length in mm.
-30Adjustable stroke window (mm the extend stroke can be shortened on site).
SOptional built-in magnet for CMSE / DMSE sensors (omit for no magnet).
BRod type: B = male thread; blank = female thread.

ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.

Where the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B Is Used

factory

Baling and compaction station

In a scrap or packaging line, the 125 mm bore drives a compaction plate at 30-500 mm/s, and the male rod thread (B) accepts a custom plate; the fixed TPU bumper absorbs the end-of-stroke shock each cycle.

Is the Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B the Right Cylinder?

The 90 mm stroke with a 30 mm window suits fixtures that need final tuning after install; the trim only shortens the extend stroke, never lengthens it. Rod end is male thread (B); port thread is PT. Choose the -S code if you later need CMSE / DMSE switches, since this unit has no magnet. FA flange or LB foot mounting bolts to the ISO 21287 face.

AirtacDistr lists every ACEJ125 order code with its price on one page at https://airtacdistr.com/products/airtac-acej125-adjustable-double-rod-compact-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Short stroke fits the compact body
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S if you need the magnet for sensors
  • ✓ Rod type (female / male B) & mount (FA/LB/CA)
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Compact body: keep the stroke short and avoid side load on the rod.
  • check Do not dismantle the threaded front/back covers.
  • check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
  • check Installation by qualified personnel per AirTAC docs.

Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B FAQ

At 0.5 MPa it pushes 6135.9 N and pulls 5890.5 N; at 0.7 MPa push is 8590.3 N and pull 8246.7 N; theoretical maximum is 1251.4 kgf at 1.0 MPa. The -30 code sets a 30 mm adjustment window: an external stop screw shortens the 90 mm extend stroke to any value from 60 to 90 mm. It is a mechanical end stop, not a load-holding lock, so the rod still drifts if air is lost. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s.

It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated 25 mm rod, threaded aluminium covers and a fixed TPU bumper at each end; the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. This model has no magnet fitted, so no switch can be read from it as delivered; order the optional -S magnet version to enable CMSE or DMSE switches. Mounting: FA flange or LB foot, with I and Y rod knuckles available. Port is 1/4" PT; for exact outline dimensions, confirm from datasheet.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Request a Quote for Airtac ACEJ125 Adjustable Compact Cylinder ACEJ125X90-30B

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for ACEJ125X90-30B and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.