This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED100X200B — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED100X200B in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD100X200B
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD100X200B is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø100mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED100X200B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM16×1.5
- StatusDiscontinued → ACED100X200B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD100X200B
Double acting with a rod leaving both covers, the ACPD100X200B delivers 3681.6 N in each direction at 0.5 MPa because both strokes work on the rod-side area. The 25 mm through-rod resists rotation and side load, gives a symmetric mount, and the rear rod can carry a sensor flag. This 100 mm bore model is discontinued; the current-production successor is the ACED100X200, so confirm ISO 21287 mounting dimensions before swapping.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters on wide gantries and heavy press fixtures. At 0.5 MPa plan on roughly 2209 N of usable work, and with a 2:1 margin it lifts about 188 kg vertically. Fixed TPU bumpers sit at both ends, speed runs 30-500 mm/s, and the male rod thread (B code) is M16x1.5 with a 1/4" PT port.
Airtac ACPD Double Rod Compact Cylinder ACPD100X200B Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD100X200B |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED100X200B |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED100X200B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3682 N |
| 0.7 MPa | 5154 N |
| Max (@1.0 MPa) | 751 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD100X200B
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD100X200B Is Used
Heavy press fixture
The 3681.6 N rod-side force in both directions suits stamping and riveting heads on a 200 mm stroke where the workpiece sits between two rods.
Gantry pick-and-place
With about 188 kg of vertical lift at a 2:1 margin, the through-rod carries a gripper on one end and a position flag on the other.
Baler ejector arm
Equal push and pull at 5154.2 N at 0.7 MPa lets one cylinder eject and retract heavy bins without a return spring or second actuator.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD100X200B with the ACED100X200B
For 200 mm strokes needing equal force both ways, this 100 mm bore gives 3681.6 N at 0.5 MPa; step down to the 80 mm bore (2356.2 N) for lighter presses or confirm from datasheet for larger needs. Note that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check for held loads. The optional -S magnet enables CMSE / DMSE switches; this code has none. Order the ACED100X200 as the current drop-in and verify ISO 21287 mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACED100X200B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD100X200B FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal in each direction: 3681.6 N at 0.5 MPa, 5154.2 N at 0.7 MPa, and up to 750.8 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure 1.5 MPa (215 psi).
Order the ACED100X200, the current-production ISO 21287 successor (swap the P for an E). It matches the same bore, stroke and force class, but because the ACP is DIN-standard you should confirm the ISO 21287 mounting dimensions before swapping. FA/FB flange and LB foot brackets bolt to the ACED face.
Related AirTAC ACE Cylinders
Request a Quote for the ACED100X200B
Send us the quantity and destination. We confirm price, stock and lead time on the ACED100X200B replacement — usually within 7-8 hours.