This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED16X160S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD16X160S
The AirTAC ACPD Double Rod Compact Cylinder ACPD16X160S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø16mm bore and 160mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED16X160S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- StatusDiscontinued → ACED16X160S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD16X160S
A double acting compact cylinder with a rod leaving both covers, the ACPD16X160S pushes and pulls with identical output: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa in either direction, because both strokes work on the rod-side area. The 160 mm stroke is a made-to-order length for this 16 mm bore, whose standard range tops out at 75 mm. The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped on for end-of-stroke signalling.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which makes it a fit for tight slides and guarded stations. A hard-anodized aluminium body carries the S45C hard-chrome through-rod, fixed TPU bumpers sit at both ends, and the through-rod itself resists rotation and modest side load while the rear rod can carry a sensor flag. Air supply is 0.15-1.0 MPa (22-145 psi) with speed from 30-500 mm/s. Note this model is discontinued: the current direct is ACED16X160, and you should confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD16X160S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD16X160S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED16X160S |
| Bore size | Ø16 mm |
| Stroke | 160 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED16X160S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD16X160S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD16X160S Is Used
Reciprocating small parts transfer
The through-rod pushes a tray out on the front stroke and retracts with equal 75.4 N force, ideal for a symmetric push-pull shuttle on an electronics assembly bench.
Position-flagged test station
With the -S magnet fitted, CMSE or DMSE switches report both end positions on a leak-test fixture, while the rear rod carries a second flag for a mid-stroke sensor.
Light press or marking head
About 45 N of practical working force at 0.5 MPa suits stamping date codes or seating small connectors where a compact 160 mm stroke head is needed inside a guard.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD16X160S with the ACED16X160S
At 75.4 N per side, this 16 mm bore suits light fixtures and small slides; step down to the 12 mm bore (42.4 N) for lighter tooling or up to the 20 mm bore (117.8 N) when the load grows. The 160 mm stroke is non-standard for bore 16 and is built to order. Remember the piston drifts if air is lost, so add a rod lock or pilot check where a load must stay put. The fitted -S magnet pairs with CMSE / DMSE switches, and FA/FB flange or LB foot mounts bolt to the same face. For new projects, order the ACED16X160 instead - same bore, stroke and force class.
Replacement checklist
- ✓ Current-production ACE → ACED16X160S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD16X160S FAQ
Because it is a double-rod cylinder, force is equal both ways: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa on every stroke, with a maximum of 15.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed runs 30-500 mm/s.
Bore 16 normally tops out at a 75 mm standard stroke, so 160 mm is a made-to-order length with a longer lead time. Also note this ACPD model is discontinued; the current-production ACED16X160 matches the bore, stroke and force class, but confirm the ISO 21287 mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ACED16X160S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED16X160S replacement — usually within 7-8 hours.