This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED25X10B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD25X10B
The AirTAC ACPD Double Rod Compact Cylinder ACPD25X10B is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø25mm bore and 10mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED25X10B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ25 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- StatusDiscontinued → ACED25X10B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD25X10B
Double acting with a rod exiting both covers, the ACPD25X10B is a DIN-standard compact cylinder that delivers 206.2 N in either direction at 0.5 MPa (288.6 N at 0.7 MPa), because both strokes work on the rod-side area. The 25 mm bore drives a 10 mm rod through a 10 mm stroke at 30-500 mm/s, with a fixed TPU bumper at each end. Air supply is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, and temperature spans -20 to +70 C.
The hard-anodized aluminium body with S45C hard-chrome rod is an ISO 21287 short-body build, saving roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight pick-and-place heads and small fixtures. Note this model is discontinued; the current-production direct is ACED25X10, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD25X10B Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD25X10B |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED25X10B |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED25X10B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD25X10B
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD25X10B Is Used
Symmetric clamp fixture
The through-rod clamps a machined housing from both sides of a milling jig with equal 206.2 N force at 0.5 MPa, keeping the fixture footprint short.
Pick-and-place head
A 10 mm stroke ejects or receives small electronics components on an SMT line, with the back-end rod carrying a flag for a proximity check.
Lab press slide
The double rod resists rotation on a small dosing slide, applying about 124 N of usable work to a vial crimping station at 0.5 MPa.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD25X10B with the ACED25X10B
The B code gives a male M6x1.0 rod thread; the port is M5x0.8 with PT body ports. The cylinder does not hold position on lost air - add a rod lock or pilot check for a held load. No magnet is fitted on this code, so no CMSE / DMSE switch can be mounted; order the -S version if switching is needed. This model is discontinued - replace it with ACED25X10 and confirm the ISO 21287 mounting dimensions.
Replacement checklist
- ✓ Current-production ACE → ACED25X10B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD25X10B FAQ
Yes - it is a double-rod cylinder, so force is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa on each stroke (rod-side area both sides). Maximum force at 1.0 MPa is 42.0 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s.
Order ACED25X10, the current ISO 21287 successor: swap the P for an E and you keep the same 25 mm bore, 10 mm stroke and force class. Confirm the ISO 21287 mounting dimensions before the swap, since the ACP was built to the DIN standard, and check FA/FB flange or LB foot bracket fit.
Related AirTAC ACE Cylinders
Request a Quote for the ACED25X10B
Send us the quantity and destination. We confirm price, stock and lead time on the ACED25X10B replacement — usually within 7-8 hours.