This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED32X175S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD32X175S
The AirTAC ACPD Double Rod Compact Cylinder ACPD32X175S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED32X175S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → ACED32X175S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD32X175S
A double acting compact cylinder with a rod leaving both covers, the ACPD32X175S pushes and pulls with identical output because each stroke works on the rod-side area: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in either direction. The 32 mm bore drives a 12 mm through-rod over a 175 mm stroke at 30-500 mm/s, with a fixed TPU bumper at each end and 1/8" ports. This unit carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the hard-anodized aluminium body.
The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag or a second tooling plate. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and gantries. Note that this model is discontinued: the current-production direct is ACED32X175, and you should confirm the ISO 21287 mounting dimensions before swapping, since the ACP is DIN-standard.
Airtac ACPD Double Rod Compact Cylinder ACPD32X175S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD32X175S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED32X175S |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED32X175S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD32X175S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD32X175S Is Used
Reciprocating transfer carriage
The through-rod drives a shuttle plate on a PCB handling line, pushing and pulling with the same 345.6 N at 0.5 MPa so the return stroke needs no derating.
Position-flagged press station
The -S magnet plus CMSE switches reports end positions on a small bracket-forming press, while the rear rod carries the flag for a second sensing point.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD32X175S with the ACED32X175S
Pick this 32 mm bore when your fixture needs equal push and pull around 345.6 N at 0.5 MPa and a 175 mm stroke that still sits under the 200 mm standard limit for this bore. If the load is lighter, the 25 mm bore gives 206.2 N both ways; if you need more, step up to the 40 mm bore at 571.8 N. Remember that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check for a held load. FA/FB flange or LB foot mounts and I/Y rod knuckles bolt to the face, and the -S magnet on this model pairs with CMSE / DMSE switches. Order ACED32X175 as the current replacement and verify the ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACED32X175S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD32X175S FAQ
Because a rod exits both covers, force is equal in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa on every stroke, with a peak of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 175 mm stroke stays within the 200 mm standard range for the 32 mm bore.
No, the ACPD family is discontinued. The current-production direct is ACED32X175, the ISO 21287 successor in the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP is DIN-standard, and check FA/FB flange or LB foot bracket fit on your fixture.
Related AirTAC ACE Cylinders
Request a Quote for the ACED32X175S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED32X175S replacement — usually within 7-8 hours.