This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED32X200S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD32X200S
The AirTAC ACPD Double Rod Compact Cylinder ACPD32X200S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED32X200S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → ACED32X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD32X200S
Double acting with a rod leaving both covers, the ACPD32X200S is a DIN-standard compact cylinder in the discontinued ACPD family. The 32 mm bore delivers 345.6 N in each direction at 0.5 MPa and 483.8 N at 0.7 MPa, because both strokes work on the rod-side area. Stroke is 200 mm, the maximum standard stroke for this bore, and the 12 mm through-rod carries a female M8x1.25 thread at each end.
The hard-anodized aluminium body with an S45C hard-chrome rod runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, at speeds of 30-500 mm/s and temperatures from -20 to +70 C. Its short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight gantries and guarding. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag. The S code on this model means the optional -S magnet is fitted, so CMSE or DMSE switches can be clipped on for position feedback. Fixed TPU bumpers sit at both ends. Production has ended: the current direct is the ACED32X200, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD32X200S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD32X200S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED32X200S |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED32X200S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD32X200S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD32X200S Is Used
Symmetric jig clamping
The equal 345.6 N force in both directions lets one fixture clamp and release a machined aluminium housing with identical grip either way, no direction derating needed.
Reciprocating transfer slide
A rod on each end drives a 200 mm shuttle between two pick positions on a small parts line, while the rear rod carries a flag for a CMSE switch to confirm home.
Pusher at conveyor mid-line
With about 207 N of usable work at 0.5 MPa, the through-rod pushes cartons of bottled sauces off a 300 mm belt into a lane diverter without twisting under side load.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD32X200S with the ACED32X200S
At 345.6 N per side (0.5 MPa), this 32 mm unit suits clamping and reciprocating tasks up to roughly 200 N of working load; step down to the 25 mm bore (206.2 N) for lighter jigs or up to the 40 mm bore (571.8 N) when more force is needed. Remember that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check for a held load. The 200 mm stroke is the maximum standard length for bore 32, and FA/FB flange or LB foot mounts bolt to the ISO 21287 face. This model is discontinued - order the ACED32X200 as the current-production equivalent and verify mounting dimensions against the datasheet.
Replacement checklist
- ✓ Current-production ACE → ACED32X200S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD32X200S FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal either way: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, air filtered to 40 um.
The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed or solid-state switches mount directly on the body for end-of-stroke or mid-stroke signals. Each end has a fixed TPU bumper that softens piston arrival; it is not adjustable and does not hold or brake a load, so use a rod lock or pilot check where a position must be kept with air off.
Related AirTAC ACE Cylinders
Request a Quote for the ACED32X200S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED32X200S replacement — usually within 7-8 hours.