This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED32X25LB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD32X25LB
The AirTAC ACPD Double Rod Compact Cylinder ACPD32X25LB is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø32mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED32X25LB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → ACED32X25LB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD32X25LB
A double acting compact cylinder with a rod leaving both covers, the ACPD32X25LB pushes and pulls with the same 345.6 N at 0.5 MPa (483.8 N at 0.7 MPa) because each stroke works on the rod-side area. The through-rod resists rotation and light side load, gives a symmetric mounting face, and the rear rod can carry a sensor flag. Its ISO 21287 short body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and gantries.
This unit is discontinued; the current-production direct is the ACED32X25, which matches the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping. The hard-anodized aluminium body carries an S45C hard-chrome rod, fixed TPU bumpers at both ends, and a 1/8" PT port. No magnet is fitted on this code; order the -S variant if you need CMSE / DMSE switch sensing.
Airtac ACPD Double Rod Compact Cylinder ACPD32X25LB Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD32X25LB |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED32X25LB |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED32X25LB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD32X25LB
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD32X25LB Is Used
Symmetric jig clamping
The through-rod lets a fixture clamp from either side with the same 345.6 N at 0.5 MPa, ideal for a 25 mm-stroke locating station on a machining jig.
Pusher on a packaging line
Equal force both directions suits a bidirectional reject pusher that diverts cartons on a conveyor at 30-500 mm/s.
Sensor flag carrier
The rear rod can mount a flag for a proximity switch, giving position feedback on a small assembly press without extra hardware.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD32X25LB with the ACED32X25LB
At 32 mm bore this sits mid-range: the 25 mm bore delivers 206.2 N at 0.5 MPa if your load is lighter, while the 40 mm bore reaches 571.8 N for heavier clamping. Keep in mind that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put. The LB foot mount bolts to standard fixtures, and the female M8x1.25 rod thread accepts standard rod knuckles. Since ACPD32X25LB is discontinued, order the ACED32X25 as the current equivalent.
Replacement checklist
- ✓ Current-production ACE → ACED32X25LB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD32X25LB FAQ
Because a rod exits both covers, force is equal in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is 1/8" PT.
Not on this code. The ACPD32X25LB has no magnet fitted; the magnet is the optional -S ordering code. If you need CMSE or DMSE reed or solid-state switches, order the -S version instead. Also note this model is discontinued - the ACED32X25 is the current ISO 21287 replacement, so confirm its mounting dimensions before converting your fixture.
Related AirTAC ACE Cylinders
Request a Quote for the ACED32X25LB
Send us the quantity and destination. We confirm price, stock and lead time on the ACED32X25LB replacement — usually within 7-8 hours.