This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED32X275B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD32X275B
The AirTAC ACPD Double Rod Compact Cylinder ACPD32X275B is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø32mm bore and 275mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED32X275B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke275 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- StatusDiscontinued → ACED32X275B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD32X275B
A double acting compact cylinder with a rod leaving both covers, the ACPD32X275B delivers 345.6 N in each direction at 0.5 MPa because both strokes work on the rod-side area. The through-rod resists rotation and side load, gives a symmetric mounting face, and the rear rod can carry a sensor flag. Its 275 mm stroke is longer than the 200 mm standard maximum for a 32 mm bore, so it is a made-to-order build. Note this model is discontinued; the current-production successor is ACED32X275.
The hard-anodized aluminium body with an S45C hard-chrome rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, with a fixed TPU bumper at each end. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which matters on a long 275 mm stroke where space is tight. The optional -S magnet code enables CMSE / DMSE switches; this unit has no magnet fitted.
Airtac ACPD Double Rod Compact Cylinder ACPD32X275B Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD32X275B |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED32X275B |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED32X275B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD32X275B
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD32X275B Is Used
Reciprocating transfer slide
The through-rod drives a slide from either cover on a packaging line, with the rear rod carrying a flag for a switch when the -S magnet is ordered.
Clamp-and-clamp fixture
A male-threaded rod on both ends lets a jig clamp two parts at once with 345.6 N per side at 0.5 MPa in a compact gantry.
Pusher on a narrow conveyor
The symmetric double rod keeps a reject pusher square across a 275 mm stroke on a bottling line, guided by the fixed TPU bumpers at each end.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD32X275B with the ACED32X275B
At 345.6 N per side at 0.5 MPa, the 32 mm bore sits between the 25 mm bore (206.2 N) and the 40 mm bore (571.8 N) - step up if your fixture needs more force, down if it is overkill. Because a plain double-rod cylinder drifts when air is lost, add a rod lock or pilot check for held loads. FA/FB flange and LB foot mounts bolt to the ISO 21287 face, and the B code gives a male M8x1.25 rod thread. If you want position sensing, order the -S magnet version instead. For new projects, spec the ACED32X275 and confirm the ISO 21287 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ACED32X275B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD32X275B FAQ
It is a double-rod cylinder, so force is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in each direction, with a maximum of 70.5 kgf at 1.0 MPa. Both strokes use the rod-side area, so there is no push-versus-pull difference. Operating range is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
The 32 mm bore normally tops out at a 200 mm standard stroke, so 275 mm is made to order. The ACPD family is discontinued; the current direct is the ACED32X275 (swap the P for an E), which matches the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, since the ACP is DIN-standard.
Related AirTAC ACE Cylinders
Request a Quote for the ACED32X275B
Send us the quantity and destination. We confirm price, stock and lead time on the ACED32X275B replacement — usually within 7-8 hours.