This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED63X110 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED63X110 in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD63X110
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD63X110 is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø63mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED63X110 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- StatusDiscontinued → ACED63X110
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD63X110
A double acting compact cylinder with a rod exiting both covers, the ACPD63X110 delivers 1458.1 N at 0.5 MPa in each direction because both strokes work on the rod-side area. The 63 mm bore, 110 mm stroke through-rod resists rotation and side load, and the rear rod can carry a sensor flag. Its hard-anodized aluminium body and S45C hard-chrome rod run at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.
This model is discontinued; the current-production replacement is the ACED63X110, a drop-in successor in the same bore, stroke and force class. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guarding. Note that the fixed TPU bumper at each end only decelerates the piston - it never holds a load, so plan a rod lock or pilot check for held positions.
Airtac ACPD Double Rod Compact Cylinder ACPD63X110 Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD63X110 |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED63X110 |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED63X110 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD63X110
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD63X110 Is Used
Reciprocating conveyor pushers
The symmetric through-rod pushes and pulls with equal 1458.1 N force, ideal for diverting cartons on packaging lines where both strokes must do real work.
Gantry-mounted eject stations
The short ISO 21287 body fits inside machine guarding where a full-length profile cylinder cannot, ejecting machined aluminum housings from fixtures at up to 500 mm/s.
Flag-driven position feedback
The rear rod carries a sensor flag, so with the optional -S magnet and CMSE / DMSE switches the press station reports end positions without extra brackets.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD63X110 with the ACED63X110
At 1458.1 N per side (2041.3 N at 0.7 MPa, up to 297.4 kgf at 1.0 MPa), bore 63 sits mid-range: step down to bore 50 for 881.2 N jobs or up to bore 80 when you need 2356.2 N. In practice, budget roughly 875 N - about 89 kg - of real work at 0.5 MPa rather than the full rating. The 110 mm stroke is well inside the 250 mm standard limit for this bore, so no made-to-order build is needed. Mount with FA/FB flange or LB foot on the ISO 21287 face, order the optional -S code if you want CMSE / DMSE switches (no magnet without it), and confirm ACED63X110 mounting dimensions before swapping.
Replacement checklist
- ✓ Current-production ACE → ACED63X110
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD63X110 FAQ
Because a rod exits both covers, force is equal in both directions: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, peaking at 297.4 kgf at 1.0 MPa. Both strokes use the rod-side area, so there is no push-versus-pull difference. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
Order the ACED63X110, the current ISO 21287 replacement (swap the P for an E). It matches the same 63 mm bore, 110 mm stroke and force class with a matching short body and mounting family. Since the ACP is DIN-standard, confirm the ISO 21287 mounting dimensions before the swap. The 1/8" port, M10x1.5 female rod thread and FA/FB or LB mounting options carry over.
Related AirTAC ACE Cylinders
Request a Quote for the ACED63X110
Send us the quantity and destination. We confirm price, stock and lead time on the ACED63X110 replacement — usually within 7-8 hours.