This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACED63X75SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD63X75SB
The AirTAC ACPD Double Rod Compact Cylinder ACPD63X75SB is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø63mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED63X75SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.5
- StatusDiscontinued → ACED63X75SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD63X75SB
A double acting, double-rod compact cylinder, the ACPD63X75SB pushes a 63 mm piston through a 75 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is identical in either direction: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag, while fixed TPU bumpers pad both ends of travel.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight gantries and guarding. This model carries the optional -S magnet, so CMSE or DMSE switches mount directly. Note that the ACPD family is discontinued; the current-production direct is ACED63X75, and buyers should confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD63X75SB Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD63X75SB |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED63X75SB |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED63X75SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD63X75SB
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD63X75SB Is Used
Reciprocating transfer arm
The through-rod drives a pick-and-place slide on a packaging line, giving 1458.1 N of grip and return force alike at 0.5 MPa over the 75 mm stroke.
Clamp and counter-clamp fixture
On a machining fixture, the rear rod clamps a workpiece while the front rod actuates a locator, both sides delivering 2041.3 N at 0.7 MPa.
Flag-driven stroke sensing
A CMSE or DMSE switch rides the back-end rod of this -S magnet model to confirm mid-stroke position on an assembly station, at speeds of 30-500 mm/s.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD63X75SB with the ACED63X75SB
For a 63 mm job needing equal force both ways, this unit delivers 1458.1 N at 0.5 MPa in each direction. Step down to ACPD50X75SB for 881.2 N, or up to ACPD80X75SB for 2356.2 N if the load grows. The 75 mm stroke sits well inside the 250 mm standard limit for this bore. Remember the piston drifts if air is lost, so add a rod lock or pilot check for held loads. FA/FB flange, LB foot, CA/CB clevis, CR, SDB and FTC mounts bolt to the same face. Since ACPD63X75SB is discontinued, order ACED63X75 and verify the ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACED63X75SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD63X75SB FAQ
Because a rod exits both covers, force is equal in both directions: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, with a peak of 297.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed 30-500 mm/s.
The hard-anodized aluminium body is a short ISO 21287-class design, about 50% shorter in mounting length than an ISO 15552 profile cylinder, with a 16 mm male-thread rod, 1/8" ports and fixed TPU bumpers. The ACPD is discontinued; ACED63X75 is the current direct successor in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ACED63X75SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACED63X75SB replacement — usually within 7-8 hours.