This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED80X110S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED80X110S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD80X110S
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD80X110S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø80mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED80X110S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- StatusDiscontinued → ACED80X110S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD80X110S
A double acting, double-rod compact cylinder built to the DIN-standard ACP layout, the ACPD80X110S runs an 80 mm bore with a 110 mm stroke and pushes a rod out of BOTH covers. Because each side sees the rod-side area, output is 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa in either direction - there is no weaker pull stroke. The through-rod resists rotation and side load, gives a symmetric mount, and the rear rod can carry a sensor flag. The -S code means the optional magnet is fitted, so CMSE / DMSE reed or solid-state switches mount directly on the body.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits tight gantries and guarded machines. In practice, plan on roughly 1414 N of usable work at 0.5 MPa (about 0.6 of the rating), which corresponds to lifting about 120 kg vertically with a 2:1 margin. Note this model is discontinued: the current-production drop-in is the ISO 21287 ACED80X110, so confirm mounting dimensions before swapping. Fixed TPU bumpers sit at both ends, speed range is 30-500 mm/s, and pressure runs 0.15-1.0 MPa (22-145 psi).
Airtac ACPD Double Rod Compact Cylinder ACPD80X110S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD80X110S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED80X110S |
| Bore size | Ø80 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED80X110S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD80X110S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD80X110S Is Used
Gantry press stations
The 2356.2 N bidirectional force at 0.5 MPa suits a staking or pressing head on a CNC tending gantry, where the short ISO 21287-class body keeps the Z-axis envelope tight.
Reciprocating conveyor gates
A rod on both covers lets one cylinder push product off a line on the forward stroke and pull the gate back with equal 2356.2 N force, with the rear rod carrying a CMSE switch flag for position feedback.
Pallet clamp fixtures
Clamping palletized loads in a warehouse transfer cell: the through-rod resists side load from misaligned pallets, and the ~120 kg vertical-lift equivalent covers typical clamp arm loading.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD80X110S with the ACED80X110S
At 80 mm bore this is a heavy-lift size: 2356.2 N per direction at 0.5 MPa, with the 63 mm bore offering 1458.1 N and the 100 mm bore 3681.6 N if you need to step down or up. The 110 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so it is a catalogue item. Choose the female M12x1.75 rod thread as coded here, or order the B variant for male thread. A plain double-rod cylinder will not hold a load if air is lost - add a rod lock or pilot check for held positions. If you are specifying new, order the ACED80X110 instead: this ACPD is discontinued and the ISO 21287 ACE matches the same bore, stroke and force class.
Replacement checklist
- ✓ Current-production ACE → ACED80X110S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD80X110S FAQ
It is a double-rod cylinder, so force is equal both ways: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, in either stroke direction, because both sides work on the rod-side area. At 1.0 MPa the maximum output reaches about 480.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
Order the ACED80X110, the ISO 21287 successor made by swapping the P for an E - it matches the same 80 mm bore, 110 mm stroke and force class. Confirm the ISO 21287 mounting dimensions before the swap, since the ACPD follows the older DIN-standard ACP footprint. The -S magnet on this unit enables CMSE / DMSE switches; on the replacement, the magnet remains an order-code option.
Related AirTAC ACE Cylinders
Request a Quote for the ACED80X110S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED80X110S replacement — usually within 7-8 hours.