This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED80X200S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED80X200S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD80X200S
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD80X200S is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø80mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED80X200S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- StatusDiscontinued → ACED80X200S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD80X200S
Double acting with a rod leaving both covers, the ACPD80X200S pushes and pulls with identical force because each stroke works on the rod-side area: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa in either direction. The 80 mm bore drives a 20 mm through-rod over a 200 mm stroke at 30-500 mm/s, with a fixed TPU bumper at each end and 1/4" ports.
The short ISO 21287 body cuts roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight presses and gantries. In practice, plan on about 1414 N of usable work at 0.5 MPa, which lifts roughly 120 kg vertically with a 2:1 margin. The -S code on this model means the magnet is fitted, so CMSE / DMSE switches can be mounted directly. Note that this model is discontinued: the current drop-in is ACED80X200, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPD Double Rod Compact Cylinder ACPD80X200S Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD80X200S |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED80X200S |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED80X200S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD80X200S
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD80X200S Is Used
Bench press stamping
The 2356.2 N double-way force marks or stamps aluminium brackets on a small bench press, with the 200 mm stroke clearing the part for manual loading.
Reciprocating conveyor pusher
A rod on each cover lets the through-rod drive a pusher arm from either side on a packaging line transfer station, with CMSE switches reporting end positions via the fitted magnet.
Gantry lift-and-lower
Equal force up and down suits a vertical gantry lifting about 120 kg of fixture weight, with the symmetric rod mount keeping the tool plate square.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD80X200S with the ACED80X200S
At 2356.2 N per side at 0.5 MPa, this 80 mm bore suits clamping and pressing jobs in the 1400 N working range; step down to the 63 mm bore (1458.1 N) for lighter loads or up to 100 mm (3681.6 N) for heavy tooling. The through-rod resists rotation and side load and gives a symmetric mount, and the back-end rod can carry a sensor flag. Remember the piston drifts if air is lost - add a rod lock or pilot check for a held load. FA/FB flange or LB foot mounting bolts to the ISO 21287 face. This model is discontinued; order ACED80X200 as the current-production equivalent.
Replacement checklist
- ✓ Current-production ACE → ACED80X200S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD80X200S FAQ
Because it is a double-rod cylinder, output is equal both ways: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa per stroke, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, on air filtered to 40 um.
The hard-anodized aluminium ISO 21287 body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, with fixed TPU bumpers at both ends and 1/4" ports. The ACPD family is discontinued; ACED80X200 is the current drop-in successor in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Related AirTAC ACE Cylinders
Request a Quote for the ACED80X200S
Send us the quantity and destination. We confirm price, stock and lead time on the ACED80X200S replacement — usually within 7-8 hours.