This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACED80X200SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACED80X200SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPD Double Rod Compact Cylinder ACPD80X200SB
The AirTAC Airtac ACPD Double Rod Compact Cylinder ACPD80X200SB is a double acting, double rod DIN-standard tight/compact air cylinder with a Ø80mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACED80X200SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- StatusDiscontinued → ACED80X200SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPD Double Rod Compact Cylinder ACPD80X200SB
This is a double acting, double-rod compact cylinder: a piston rod exits both covers of the 80 mm bore body, so the output force is equal in both directions because each stroke works on the rod-side area. At 0.5 MPa it delivers 2356.2 N either way, rising to 3298.7 N at 0.7 MPa, with a male rod thread (B code) and a 1/4" port. The 200 mm stroke sits well inside the 300 mm standard range for this bore. Note that this model is discontinued; the current-production drop-in is the ISO 21287 ACED80X200.
The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag or a second tooling plate. The short ISO 21287 body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight gantries and press fixtures. For sizing, treat about 1414 N (roughly 0.6 of the 0.5 MPa rating) as the usable working force, which equates to lifting about 120 kg vertically with a 2:1 margin. A fixed TPU bumper decelerates the piston at each end, and the fitted -S magnet accepts CMSE / DMSE switches. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C.
Airtac ACPD Double Rod Compact Cylinder ACPD80X200SB Technical Specifications
| Model | Airtac ACPD Double Rod Compact Cylinder ACPD80X200SB |
|---|---|
| Series | ACPD DIN compact cylinder (discontinued) |
| Replacement | ACED80X200SB |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACED80X200SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACPD Double Rod Compact Cylinder ACPD80X200SB
| ACPD | DIN compact cylinder (double-rod, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPD Double Rod Compact Cylinder ACPD80X200SB Is Used
Press-station clamping from both sides
A double-rod 80 mm bore clamps a die or workpiece on the front rod while the rear rod drives a locator plate, giving 2356.2 N of equal force each way at 0.5 MPa in a stamping cell.
Counterweight gantry lift
The symmetric through-rod balances a 120 kg pallet elevator head on a vertical axis, with the rear rod carrying a CMSE switch flag for top and bottom position feedback.
Bidirectional pusher on a packaging line
A 200 mm stroke pushes cartons off a conveyor in either direction at the same force, so one cylinder and one valve circuit handle both divert positions without a second actuator.
Replacing the Airtac ACPD Double Rod Compact Cylinder ACPD80X200SB with the ACED80X200SB
Pick this 80 mm bore when your job needs around 2356.2 N at 0.5 MPa in both directions; step down to the 63 mm bore (1458.1 N) for lighter clamping or up to the 100 mm bore (3681.6 N) for heavier presses. Because the piston drifts when air is lost, add a rod lock or pilot check valve if the load must stay put. FA/FB flange and LB foot mountings bolt to the ISO 21287 face, and the -S magnet in this code lets you fit CMSE / DMSE switches for end-position sensing. Before ordering, confirm the ISO 21287 mounting dimensions of the ACED80X200 replacement, since the ACP is DIN-standard.
Replacement checklist
- ✓ Current-production ACE → ACED80X200SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPD Double Rod Compact Cylinder ACPD80X200SB FAQ
Because a rod exits both covers, the force is equal in both directions: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, using the rod-side area on each stroke. At the full 1.0 MPa the theoretical maximum is 480.5 kgf. Plan on roughly 1414 N of usable working force at 0.5 MPa, about 120 kg of vertical lift with a 2:1 margin. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and speed runs 30-500 mm/s.
The ACPD family is no longer in production. The current-production replacement is the ACED80X200, the ISO 21287 successor with the same 80 mm bore, 200 mm stroke and force class. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flange or LB foot hardware bolts to the same face, but confirm the ISO 21287 mounting dimensions before swapping since the ACP is DIN-standard. This SB code already carries the -S magnet for CMSE / DMSE switches and a male rod thread.
Related AirTAC ACE Cylinders
Request a Quote for the ACED80X200SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACED80X200SB replacement — usually within 7-8 hours.