This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACEJ16X150-20, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-20
The AirTAC ACPJ Adjustable Compact Cylinder ACPJ16X150-20 is a double acting, double rod, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 150mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X150-20 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke150 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X150-20
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-20
The -20 code adds a 20 mm adjustment window: a stop screw trims the 150 mm extend stroke down to 130 mm on site, so one cylinder covers a 130-150 mm range. Note this is a discontinued model; the current-production replacement is the ACEJ16X150 in the same bore, stroke and force class.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in slim jigs and guarded stations. The 150 mm stroke exceeds the 75 mm standard maximum for bore 16, so it is a made-to-order build. The hard-anodized aluminium body carries an S45C hard-chrome rod, a fixed TPU bumper at each end, and an M4x0.7 female rod thread; the optional -S magnet enables CMSE / DMSE switches, and without -S no magnet is fitted.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-20 Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-20 |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X150-20 |
| Bore size | Ø16 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X150-20 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
ACPJ is double-rod: the rear rod that carries the stroke adjuster exits the rear cover, so both piston faces lose rod area. The rod-side (annular) area is used for both directions (conservative).
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-20
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -20 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-20 Is Used
Sensed part ejection on an assembly line
Ordered with the optional -S magnet, CMSE or DMSE switches confirm eject position in a compact assembly station where the short body fits beside neighboring tooling.
Carton push-off at a packing bench
The 130-150 mm adjustable range pushes lightweight cartons off a conveyor lane, with the fixed TPU bumper softening both ends at speeds from 30-500 mm/s.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-20 with the ACEJ16X150-20
The stop screw only shortens the extend stroke and is not a mid-stroke lock, so the piston still drifts if air is lost. Match FA/FB flange or LB foot mounts and the I/Y rod knuckles to your fixture, order the -S code if CMSE / DMSE sensing is planned, and confirm ISO 21287 mounting dimensions before swapping to the ACEJ16X150 replacement.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X150-20
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X150-20 FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa it pushes 140.7 N and pulls 105.6 N, with a theoretical maximum of 20.5 kgf at 1.0 MPa. The -20 code gives a 20 mm adjustment window: the external stop screw shortens the 150 mm extend stroke to as little as 130 mm. It cannot lengthen the stroke past 150 mm, and the stop is not a load-holding brake. The 150 mm stroke is a made-to-order build since bore 16 tops out at 75 mm standard.
No - the ACPJ family is discontinued. The current-production direct is the ACEJ16X150, which matches the same 16 mm bore, 150 mm stroke and force class, but you should confirm the ISO 21287 mounting dimensions before swapping because the ACP was built to a DIN standard. Also note the port is M5x0.8, the rod thread is female M4x0.7, and position sensing requires the optional -S magnet with CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X150-20
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X150-20 replacement — usually within 7-8 hours.