This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACEJ16X90-75S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACEJ16X90-75S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X90-75S
The AirTAC Airtac ACPJ Adjustable Compact Cylinder ACPJ16X90-75S is a double acting, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 90mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X90-75S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke90 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X90-75S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X90-75S
Double acting and adjustable, the ACPJ16X90-75S is a discontinued DIN-standard compact cylinder: an external stop screw trims the 90 mm extend stroke anywhere inside the 75 mm window, giving a usable range of 15-90 mm. At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa that rises to 140.7 N push. The S code means the magnet is fitted, so CMSE or DMSE switches can be clamped straight onto the hard-anodized aluminium body. The 90 mm stroke is longer than the 75 mm standard maximum for a 16 mm bore, so this unit is made to order.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs and guard-mounted tooling. For sizing, treat about 60 N (0.6 of the push force) as the practical working load at 0.5 MPa, which lifts roughly 5 kg vertically with a 2:1 margin. A fixed TPU bumper at each end decelerates the piston; it never locks a load, and on air loss the rod still drifts. This model is discontinued - the current-production drop-in is the ACEJ16X90, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X90-75S Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X90-75S |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X90-75S |
| Bore size | Ø16 mm |
| Stroke | 90 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X90-75S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 75 N |
| 0.7 MPa | 141 N | 106 N |
| Max (@1.0 MPa) | 21 kgf | |
The ACEJ16X90-75S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X90-75S
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X90-75S Is Used
Fixture clamp with tuned stroke
On a small CNC fixture, the stop screw is set to 40 mm so the 100.5 N push seats an aluminium bracket without over-travel, and the fitted magnet signals clamp-complete to the PLC.
Packaging line reject pusher
A 90 mm stroke kicks underweight cartons off a narrow conveyor; trimming to 60 mm via the 75 mm window matches the lane width, and the 5 kg vertical-lift margin covers the carton weight easily.
Lab sample press
A benchtop sample press uses the 15-90 mm adjustable range to compress vials gently - about 60 N of usable force at 0.5 MPa is enough for soft capping, with the M5x0.8 ports fed from a small regulator.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X90-75S with the ACEJ16X90-75S
Choose this 16 mm bore when your clamp or positioner needs 100.5 N push at 0.5 MPa and a stroke you can dial down on site from 90 mm to as little as 15 mm. If the full 90 mm is never needed, the bore 12 ACPJ12X90-75S (56.5 N push) costs less; if you need more force, step up to the 20 mm bore at 157.1 N push. Both FA flange and LB foot mountings bolt to the same face, and the fitted magnet pairs with CMSE / DMSE switches for end-of-stroke signals. Note the 90 mm stroke is non-standard for this bore. Order the ACEJ16X90 instead - it is the current replacement in the same bore, stroke and force class.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X90-75S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X90-75S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa it pushes 140.7 N and pulls 105.6 N; theoretical maximum is 20.5 kgf at 1.0 MPa. The -75 code is a 75 mm adjustment window: a stop screw shortens the 90 mm extend stroke on site, so the usable range is 15-90 mm. It shortens the stroke only - it is not a mid-stroke lock, and the rod still drifts if air is lost. Operating pressure is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, ports M5x0.8, rod thread female M4x0.7.
No - the ACPJ16X90-75S is discontinued. The current-production drop-in is the ACEJ16X90 (swap the P for an E), which matches the same bore, stroke and force class in the ISO 21287 compact family. Because the ACP is DIN-standard, confirm the ISO 21287 mounting dimensions before swapping. The replacement keeps FA flange and LB foot options, and the -S magnet code for CMSE / DMSE switches carries over.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X90-75S
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X90-75S replacement — usually within 7-8 hours.