Airtac ACQD Double Acting Compact Cylinder ACQD16X15B
The AirTAC ACQD Double Acting Compact Cylinder ACQD16X15B is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø16mm bore and 15mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ16 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7 (F) / M6×1.0 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD16X15B
The AirTAC ACQD16X15B is a double-acting JIS compact cylinder featuring twin rods that exit both ends of its riveted C-clip body. Because a rod occupies each chamber, the annular area is identical in both directions. This means push and pull forces are equal, delivering 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa. The symmetrical force profile is ideal for balanced push/pull cycles.
The dual rods provide extended guide length and inherent anti-rotation properties, allowing the unit to carry a small tool platform without needing an external guide. This specific configuration includes a male M6x1.0 rod-end thread for direct load coupling and an M5x0.8 port. It relies on fixed TPU elastomer bumpers at each end for end-of-stroke deceleration rather than adjustable air cushions. Please note this variant ships without a piston magnet.
Airtac ACQD Double Acting Compact Cylinder ACQD16X15B Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD16X15B |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø16 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod end thread | M4×0.7 female / M6×1.0 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 60 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø16mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 75 N | 75 N |
| 0.7 MPa | 106 N | 106 N |
| Max (@1.0 MPa) | 15 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD16X15B
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 16 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD16X15B Is Used
Twin-Guided Pick & Place
Handles small electronic components on PCB assembly lines where the dual rods prevent jaw twist during rapid vertical transfers.
Symmetric Transfer Shuttle
Drives a light parts shuttle on packaging machinery, utilizing the identical push and pull forces to maintain consistent cycle timing.
Dual-Station Actuation
Powers a compact testing fixture where the second rod end actuates a mechanical flag or secondary limit mechanism simultaneously.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD16X15B the Right Cylinder?
When sizing this 16 mm bore, stepping down to a 12 mm bore yields 42.4 N of force at 0.5 MPa, while stepping up to a 20 mm bore provides 117.8 N. Choose the ACQD16X15B when symmetric thrust and torsional rigidity are required in a compact footprint. If your application only requires unidirectional pushing, a single-rod ACQ cylinder might offer a marginally smaller footprint. For applications demanding precise non-rotational guidance over longer strokes, a guided TACQ cylinder may be a better fit. Ensure you specify the M5x0.8 port and the male M6x1.0 rod thread when ordering compatible fittings and tooling.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD16X15B FAQ
The ACQD16X15B provides an equal push and pull force of 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa, with a maximum force of 15 kgf at 1.0 MPa. Push and pull forces are identical because the double-rod design creates the same annular area in both chambers. The maximum standard stroke available for the 16 mm bore is 60 mm.
The twin rods resist rotation and extend guide length without an external guide. It uses fixed TPU elastomer bumpers at both ends for deceleration, not adjustable air cushions. A plain ACQD does not hold position on air loss; the rod drifts, so an external rod lock or pilot check valve is required for fail-safe load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD16X15B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.