Airtac ACQD Double Acting Compact Cylinder ACQD25X80
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD25X80 is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø25mm bore and 80mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ25 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0 (F) / M10×1.25 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD25X80
The AirTAC ACQD25X80 is a double-acting JIS compact cylinder featuring a 12mm piston rod exiting both ends. Because a rod occupies each chamber, the annular area is identical in both directions, generating equal push and pull forces of 188.9N at 0.5MPa and 264.5N at 0.7MPa. This symmetry is ideal for applications requiring consistent bi-directional thrust.
The twin-rod architecture inherently resists rotation and extends the guiding length, allowing you to mount a small tool platform directly without needing a separate external guide. This 25mm bore unit includes fixed TPU bumpers at both ends for end-of-stroke deceleration rather than adjustable air cushions. It features an M5x0.8 port and a default M6x1.0 female rod-end thread. Note that this specific configuration ships without a sensor magnet.
Airtac ACQD Double Acting Compact Cylinder ACQD25X80 Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD25X80 |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod end thread | M6×1.0 female / M10×1.25 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø25mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 189 N | 189 N |
| 0.7 MPa | 264 N | 264 N |
| Max (@1.0 MPa) | 39 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD25X80
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD25X80 Is Used
Symmetric Transfer Shuttle
Drives a parts shuttle back and forth across a packaging conveyor, utilizing the equal push and pull thrust to maintain consistent cycle times in both directions.
Twin-Guided Pick-and-Place
Carries a small pneumatic gripper on a 3D printer toolhead, relying on the dual rods to prevent platform rotation during vertical descent without adding an external guide rail.
Dual-Station Actuation
Uses the second protruding rod end to trigger a mechanical flag on a textile machine, confirming stroke completion while the primary side drives the main workpiece clamp.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD25X80 the Right Cylinder?
Select this 25mm bore model when your mechanism requires 188.9N of equal bidirectional force at 0.5MPa. If your application needs less thrust, the neighboring 20mm bore provides 117.8N, while stepping up to the 32mm bore yields 301.6N. An 80mm stroke is well within the 100mm maximum standard stroke limit for this bore size. If your design only requires unidirectional push force, a single-rod ACQ cylinder is a more compact choice, whereas a guided TACQ fits heavier lateral loads. Confirm your ordering essentials: this variant uses PT ports and a female M6x1.0 rod thread.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD25X80 FAQ
The ACQD25X80 provides equal push and pull forces of 188.9N at 0.5MPa and 264.5N at 0.7MPa, with a maximum force of 39kgf at 1.0MPa. Push and pull forces are equal because the double-rod design creates the same annular area in both chambers. The maximum standard stroke available for this 25mm bore is 100mm.
No, it uses fixed TPU elastomer bumpers at both ends for end-of-stroke deceleration, not adjustable air cushions. Additionally, while the body retains sensor grooves for reed or solid-state switches, this specific model ships without the internal magnet, so position sensing is not possible without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD25X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.