Airtac ACQD Double Acting Compact Cylinder ACQD32X200
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD32X200 is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø32mm bore and 200mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ32 mm
- Stroke200 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD32X200
The AirTAC ACQD32X200 is a double-acting JIS compact cylinder featuring a twin-rod design where a Ø16mm piston extends from both body ends. Because a rod occupies each chamber, the annular area is identical in both directions, yielding perfectly equal push and pull forces of 301.6N at 0.5MPa and 422.2N at 0.7MPa. This symmetry is ideal for applications requiring balanced bi-directional cycling.
With a 200mm stroke, this unit is a made-to-order long-stroke variant exceeding the 100mm standard maximum for the Ø32 bore. The riveted C-clip body includes fixed NBR elastomer bumpers at each end for end-of-stroke deceleration rather than adjustable air cushions. While it lacks a magnet, the body retains magnetic-switch grooves for external sensor mounting. Note that a plain cylinder drifts on air loss; an external rod lock or pilot check valve is required for fail-safe holding.
Airtac ACQD Double Acting Compact Cylinder ACQD32X200 Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD32X200 |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø32mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | 422 N |
| Max (@1.0 MPa) | 62 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD32X200
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD32X200 Is Used
Symmetric Transfer Jig
Drives a dual-sided pick-and-place arm in electronics assembly, using the equal push and pull forces to maintain balanced cycle times without momentum drift.
Twin-Guided Pusher
Positions parts on a packaging conveyor where the dual rods prevent platform rotation over the 200mm travel without needing an external guide rail.
Dual-Station Actuation
Simultaneously triggers two separate clamps on a machining fixture using both protruding rod ends, saving space by combining motions in one body.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD32X200 the Right Cylinder?
Selecting this 32mm bore model provides 301.6N of force at 0.5MPa. If less force is acceptable, stepping down to a 25mm bore yields 188.9N, while a 40mm bore increases output to 527.8N. The 200mm stroke is a non-standard long-stroke configuration. If your mechanism only needs single-direction actuation, a single-rod ACQ series is more compact. For applications needing precise anti-rotation guidance over longer spans, a guided TACQ cylinder might offer better lateral stability. Confirm the PT1/8 port and female M8x1.25 rod-end thread when ordering.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD32X200 FAQ
It delivers an equal push and pull force of 301.6N at 0.5MPa and 422.2N at 0.7MPa, with a maximum capacity of 61kgf at 1.0MPa. Push and pull forces are equal because the twin rods create identical annular areas on both sides. The 200mm stroke is a long-stroke made-to-order variant exceeding the 100mm standard max. It uses a PT1/8 port and a female M8x1.25 rod-end thread.
The twin rods exiting both ends resist rotation and provide a longer guide length. It uses fixed NBR elastomer bumpers at stroke ends rather than adjustable air cushions; for high energy loads, add an external shock absorber. It does not hold position on air loss, so an external rod lock or pilot check valve is needed for fail-safe holding. This specific model ships without a sensor magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.