Airtac ACQD Double Acting Compact Cylinder ACQD32X35S
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD32X35S is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø32mm bore and 35mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ32 mm
- Stroke35 mm
- Port sizePT1/8
- Acting typeDouble acting, double rod
- Rod threadM8×1.25 (F) / M14×1.5 (B)
- CushionBumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACQD Double Acting Compact Cylinder ACQD32X35S
The AirTAC ACQD32X35S is a double-acting JIS compact cylinder with twin Ø16mm rods extending from both ends. Because a rod occupies each chamber, the annular area is identical in both directions, yielding perfectly equal push and pull forces of 301.6N at 0.5MPa and 422.2N at 0.7MPa. This symmetry is ideal for actuators needing identical motion dynamics in both travel directions.
The dual-rod architecture inherently resists rotation and provides a longer guide length, allowing you to mount a small tool platform directly without needing an external anti-rotation guide. The second rod end can drive a sensor flag or a secondary load. It features fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration, and the -S magnet enables position detection using reed or solid-state switches.
Airtac ACQD Double Acting Compact Cylinder ACQD32X35S Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD32X35S |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | PT1/8 |
| Rod end thread | M8×1.25 female / M14×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø32mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | 422 N |
| Max (@1.0 MPa) | 62 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD32X35S
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD32X35S Is Used
Symmetric Transfer Arms
Drives a dual-sided pick-and-place arm in packaging lines where equal push and pull forces ensure consistent placement timing.
Twin-Guided Pusher Stations
Indexes product on a conveyor without rotational deflection, using the second rod end to mount a cam or sensor flag.
Dual-Station Actuation
Actuates two clamps simultaneously from one compact body in CNC fixture automation, saving space over external guides.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD32X35S the Right Cylinder?
Delivering 61kgf maximum at 1.0MPa, this 32mm bore sits between the 25mm ([email protected]) and 40mm ([email protected]) sizes for sizing equal push/pull cycles. If your application only needs force in one direction, a single-rod ACQ is more compact; for high side loads requiring external guidance, a TACQ guided cylinder fits better. To order: confirm the 35mm stroke, PT1/8 port, and default M8x1.25 female rod-end thread.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD32X35S FAQ
It delivers an equal push and pull force of 301.6N at 0.5MPa and 422.2N at 0.7MPa, with a maximum of 61kgf at 1.0MPa. Push equals pull because the twin rods create identical annular areas both ways. The maximum standard stroke for this 32mm bore is 100mm.
The twin rods resist rotation and extend guide length. Fixed NBR bumpers decelerate the piston at stroke ends (not adjustable). The -S magnet works with reed or solid-state switches. A plain ACQD does not hold position on air loss; use an external rod lock or pilot check valve for fail-safe holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD32X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.