Airtac ACQD Double Acting Compact Cylinder ACQD63X175S
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD63X175S is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø63mm bore and 175mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ63 mm
- Stroke175 mm
- Port sizePT1/4
- Acting typeDouble acting, double rod
- Rod threadM10×1.5 (F) / M18×1.5 (B)
- CushionBumper (both ends)
About the Airtac ACQD Double Acting Compact Cylinder ACQD63X175S
The AirTAC ACQD63X175S is a double-acting JIS compact cylinder featuring twin rods extending from both ends. Because a rod occupies each chamber, the annular area remains identical in both directions, yielding perfectly equal push and pull forces of 1401.5N at 0.5MPa and 1962.2N at 0.7MPa. This 175mm stroke is a made-to-order long-stroke variant, exceeding the standard 100mm maximum for this 63mm bore.
Dual shafts provide extended guide length and inherent anti-rotation properties without needing an external guide rail. The second rod end can drive a secondary load or mount a sensor flag. NBR elastomer bumpers fixed at both ends manage end-of-stroke impact, and the -S option includes a piston magnet compatible with reed or solid-state electronic switches.
Airtac ACQD Double Acting Compact Cylinder ACQD63X175S Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD63X175S |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø63mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD63X175S
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD63X175S Is Used
Symmetric Transfer Shuttle
Drives a packaging line shuttle where equal push and pull forces ensure consistent cycle times in both directions without torque asymmetry.
Twin-Guided Machining Pusher
Deploys a CNC deburring head using the dual rods to resist rotational deflection and maintain tool alignment over the extended 175mm travel.
Dual-Station Actuation
Powers an assembly fixture where the primary rod strokes the workpiece while the secondary opposite rod trips an external solid-state sensor flag.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD63X175S the Right Cylinder?
Select this 63mm bore for applications demanding 1962.2N of symmetric force at 0.7MPa. If your project requires less push, the adjacent 50mm bore yields 824.6N at 0.5MPa; for heavier demands, the 80mm bore provides 2267.8N at 0.5MPa. If absolute load holding is required during air loss, pair this cylinder with an external rod lock or pilot check valve, as the fixed bumpers only decelerate near stroke end. Confirm your ordering needs: 175mm nonstandard stroke, PT1/4 ports, and M10x1.5 female rod threads.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD63X175S FAQ
It delivers equal push and pull forces of 1401.5N at 0.5MPa and 1962.2N at 0.7MPa, with a maximum holding capability of 286kgf at 1.0MPa. Push equals pull because the twin rods create identical annular areas both ways. The 175mm stroke is a made-to-order long-stroke variant exceeding the 100mm standard maximum for this 63mm bore.
The twin rods resist rotation and double the guide length. Fixed NBR elastomer bumpers absorb end-impact, but for high energy you should slow the approach or add external shock absorbers. The -S magnet works with reed or solid-state electronic switches fitted into the body grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD63X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.