Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø63mm bore and 200mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ63 mm
- Stroke200 mm
- Port sizePT1/4
- Acting typeDouble acting, double rod
- Rod threadM10×1.5 (F) / M18×1.5 (B)
- CushionBumper (both ends)
About the Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB
The ACQD63X200SB is a double-acting JIS compact cylinder featuring twin Ø20mm rods that exit both ends of the body. Because a rod occupies each chamber, the annular area is identical in both directions, yielding perfectly equal push and pull forces of 1401.5N at 0.5MPa and 1962.2N at 0.7MPa. This symmetry is ideal for applications requiring consistent power in both travel directions.
This 200mm variant is a made-to-order long-stroke unit, exceeding the 100mm standard maximum for the 63mm bore. It includes a male M18x1.5 rod-end thread (-B) for direct load coupling and a piston magnet (-S) for position sensing. Fixed NBR elastomer bumpers absorb end-of-stroke impact, and the extended guide length provided by the dual rods resists torsion without needing external guides.
Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø63 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | PT1/4 |
| Rod end thread | M10×1.5 female / M18×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø63mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1402 N | 1402 N |
| 0.7 MPa | 1962 N | 1962 N |
| Max (@1.0 MPa) | 286 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 63 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB Is Used
Symmetric Transfer Shuttle
Drives a packaging line shuttle back and forth with matched 1962.2N thrust in both directions, ensuring consistent cycle timing without drift.
Twin-Guided Pusher Station
Pushes heavy pallets on a conveyor using the dual rods to prevent torsional deflection, eliminating the need for a separate external guide rail.
Dual-Station Actuation
Uses the second protruding rod end to trigger a remote mechanical flag on an assembly machine while the primary side drives the workpiece.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB the Right Cylinder?
Selecting this model provides 286kgf at 1.0MPa. If your application requires less force, the neighboring 50mm bore delivers 824.6N at 0.5MPa; for higher loads, the 80mm bore provides 2267.8N at 0.5MPa. Keep in mind this 200mm stroke is a non-standard long-stroke configuration. If your mechanism only needs unidirectional thrust, a single-rod ACQ cylinder offers a shorter footprint, while a guided TACQ unit provides extra lateral stability for heavy off-center loads. Confirm the PT1/4 port and M18x1.5 male threads when ordering.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB FAQ
It delivers equal push and pull forces of 1401.5N at 0.5MPa and 1962.2N at 0.7MPa, with a maximum of 286kgf at 1.0MPa. The push and pull forces are identical because the twin rods create the same annular area in both chambers. The 200mm stroke is a non-standard long-stroke variant, exceeding the 100mm standard maximum for this bore.
No, a standard ACQD does not hold position when air is lost; the rod will drift. The fixed NBR bumpers only decelerate the piston near the stroke ends and do not act as a brake. For fail-safe load holding, you must install an external rod lock or a pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD63X200SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.