Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB
The AirTAC Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB is a genuine double-acting COMPACT (JIS) cylinder with a piston rod out BOTH ends — a Ø80mm bore and 200mm stroke. The twin rods resist rotation and give equal push and pull force, so it carries and guides a tool platform without a separate anti-rotation guide.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting, double rod
- Rod threadM16×2.0 (F) / M22×1.5 (B)
- CushionBumper (both ends)
About the Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB
The AirTAC ACQD80X200SB is a double-acting JIS compact cylinder featuring twin Ø25mm rods extending from both ends. Because a rod occupies each chamber, the annular area remains identical in both directions, yielding equal push and pull forces of 2267.8N at 0.5MPa and 3175N at 0.7MPa. This 200mm stroke is a made-to-order long-stroke variant, exceeding the 100mm standard maximum for this bore size.
The dual-rod architecture inherently resists rotation and provides an extended guide length, allowing it to carry a tool platform without needing an external anti-rotation guide. It includes a male M22x1.5 rod-end thread for direct load coupling, a built-in magnet for electronic or reed switches, and fixed NBR elastomer bumpers at both ends for end-of-stroke deceleration.
Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB Technical Specifications
| Model | Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB |
|---|---|
| Series | ACQD JIS compact double-rod cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | PT3/8 |
| Rod end thread | M16×2.0 female / M22×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQD datasheet. A rod exits both ends, so both directions use the same annular area. Confirm against the product label before installation.
Theoretical Output Force (Ø80mm — equal both ways)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2268 N | 2268 N |
| 0.7 MPa | 3175 N | 3175 N |
| Max (@1.0 MPa) | 463 kgf | |
Because a rod occupies both chambers, push and pull forces are EQUAL — the annular area applies in each direction. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB
| ACQD | JIS compact double-acting DOUBLE-ROD cylinder series. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch sensing (omit = none). |
| B | Male-thread piston rod (omit = female thread). |
Thread: PT standard (G / NPT available). The twin rods resist rotation and add guiding length. Related: ACQ (single rod), ACQJ (adjustable stroke), TACQ (guided).
Where the Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB Is Used
Twin-Guided Pusher
Drives a wide packaging carton pusher on a sealing line, using the dual rods to keep the platen perfectly parallel and prevent twisting under offset loads.
Symmetric Transfer
Powers a vertical pick-and-place gantry in electronics assembly, leveraging the equal bidirectional force to maintain balanced upstroke and downstroke timing.
Dual-Station Actuation
Indexes a machining fixture on an automotive parts line, using the second protruding rod end to trip a solid-state position sensor for a secondary operation.
Is the Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB the Right Cylinder?
Selecting this 80mm bore provides 2267.8N of force both ways at 0.5MPa, sitting between the 63mm bore (1401.5N) and the 100mm bore (3524.8N). If your application requires less reach, a single-rod ACQ offers a more compact footprint, while a guided TACQ unit fits setups needing heavy external lateral loads. Confirm this 200mm long-stroke setup requires the -S magnet and -B male M22x1.5 thread options, plus a PT3/8 air connection.
Quick checklist
- ✓ Equal force both ways at your pressure
- ✓ Anti-rotation needed (twin rods)?
- ✓ Both rod ends usable for tooling?
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Both rods share the load — keep force concentric.
- check Twin rods resist rotation but avoid heavy side load.
- check Handle the C-clip carefully; seat it fully in its groove.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB FAQ
It delivers an equal push and pull force of 2267.8N at 0.5MPa and 3175N at 0.7MPa, with a maximum force of 463kgf at 1.0MPa. Push and pull are equal because the twin rods create the same annular area in both chambers. This 200mm unit is a long-stroke variant exceeding the 100mm standard max, and it features a PT3/8 port with a male M22x1.5 rod thread.
The dual rods resist rotation and extend guide length without external guides. Fixed NBR bumpers decelerate the load near stroke ends, though external shock absorbers are recommended for high energy. A plain ACQD does not hold position on air loss; for fail-safe holding, install an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQD Compact Cylinders
Request a Quote for Airtac ACQD Double Acting Compact Cylinder ACQD80X200SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.