
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX140-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X140-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a nominal 140 mm stroke that can be dialed back by up to 30 mm, giving you a 110-140 mm usable travel window for fine end-position tuning during commissioning.
This variant includes a magnet for CMSE and DMSE sensors and uses a SUS420J2 stainless steel rod (option A) for improved corrosion resistance. The extruded aluminum barrel integrates sensor grooves on both sides. The rear adjuster acts purely as a mechanical stop to set the travel end and does not hold the load without live air pressure.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX140-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 110-140 mm end-position during product size changes without swapping the cylinder or adding external stopper blocks.
Clamp parts of slightly varying widths by adjusting the rear screw up to 30 mm, ensuring precise contact on every cycle.
Choose this 32 mm bore model when you need variable end-stops for product changeovers rather than a fixed-stroke SAI cylinder. The PT tapered ports and G1/8 thread interface match standard ISO 15552 mounting dimensions, utilizing the reduced SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Because the 12 mm rod diameter is relatively small, ensure external guides support any lateral loads. For load-holding without continuous air pressure, consider the SAIL or BSAI series instead of relying on the adjuster.
AirtacDistr lists every SAIJ32-SUS order code with its price on one page at https://airtacdistr.com/products/airtac-saij32-sus-adjustable-cylinder
Quick checklist
At 0.7 MPa, the push force increases to 563 N.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the effective travel from the nominal 140 mm down to 110 mm. This creates a 110-140 mm adjustable window for fine-tuning at commissioning, but it does not lock the load without live air.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.