
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX170-50 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 170mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X170-50 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the effective travel down from a 170 mm nominal stroke to a 120 mm minimum. This creates a highly versatile 120-170 mm usable window, letting you dial in the exact end-of-stroke position during commissioning without adding external stops. Equipped with a SUS420J2 stainless steel rod, it handles minor side loads efficiently while resisting corrosion.
It features PT tapered G1/8 ports and variable air cushions at both ends to decelerate the moving load. The rear adjuster acts purely as a mechanical travel stop and does not hold the load without live air pressure; for positive load-holding, consider the SAIL or BSAI series.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX170-50 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Quickly adapt end-stops for different product sizes on a packaging line using the 50 mm adjustment range, avoiding mechanical teardown.
Dial in the exact retract position during machine commissioning to perfect a gripping or clamping motion within the 120-170 mm window.
Select this specific SAIJ configuration when your machine setup requires frequent product changeovers or exact end-position tuning across a 120-170 mm travel window. The generous 50 mm adjustment range is ideal for adapting to varying package sizes on a line without physically swapping out the cylinder.
When replacing an ISO 15552 cylinder, match these exact parameters: 32 mm bore, 170 mm nominal stroke, 50 mm adjustment range, PT G1/8 port thread, and a SUS420J2 stainless steel rod. This model lacks a magnet, so position sensing via CMSE or DMSE switches is not possible without upgrading to an -S variant. SAIJ supports a specific mounting subset including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
At 0.9 MPa, the push force increases to 724 N.
The rear adjusting screw acts as a mechanical stop that trims the effective travel back by up to 50 mm from the 170 mm nominal stroke, providing a usable window of 120-170 mm. It only sets the end position and does not lock or hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.