Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke195 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S
The AirTAC SAIJ32X195-100-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 402N of push force at 0.5 MPa and features a 12mm SUS420J2 stainless steel rod. The integrated magnet supports position sensing, while the PT G1/8 port ensures reliable pneumatic connection.
With a 195mm nominal stroke and a 100mm adjustment range, this model provides a wide usable travel window of 95-195mm. This allows you to fine-tune the retract end-position at commissioning without swapping the cylinder or adding external stops. It includes adjustable air cushions at both ends and operates at speeds of 30-800mm/s.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S Is Used
Machine Changeover
Dial in the 95-195mm travel window during product size changes without replacing the cylinder or bolting on external stops.
End-Position Tuning
Fine-tune the retract end-stop during commissioning to perfect the 402N push stroke for delicate assembly tasks.
Variable Diverter Stops
Adjust the stroke on the fly for conveyor lines handling varying package sizes, using the -S magnet for position confirmation.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S the Right Cylinder?
Choose this 32mm bore when you need precise retract positioning within a 95-195mm travel window, offering 402N push force at 0.5 MPa. If your application requires greater thrust, stepping up to the 40mm bore yields 628N. The rear adjuster acts strictly as a mechanical stop for end-position tuning, not a lock; if you need to hold a load without live air pressure, consider the SAIL or BSAI series. This SAIJ model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2), omitting FB, CA, CB, and CR brackets.
For a drop-in ISO 15552 replacement, match the 32mm bore, 195mm stroke, 100mm adjustment, PT G1/8 port, and -S magnet. The 12mm rod thread (M10x1.25) handles moderate side loads, but for strokes of 300mm or longer, an external guide rail is recommended to prevent rod binding. The -S magnet works seamlessly with AirTAC CMSE reed and DMSE electronic sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 100mm. This creates a usable travel window of 95-195mm, allowing you to set the exact retract end-position without changing the cylinder.
At 0.5 MPa operating pressure, it provides 402N of push force and 345N of pull force. The maximum thrust is 82kgf at 1.0 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX195-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.