Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 230mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke230 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S
The AirTAC SAIJ32X230-10-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers a practical thrust of 563N push and 345N pull at 0.5 MPa, utilizing a 12mm piston rod and G1/8 port. By turning the rear stopper screw, you can trim the effective travel within a 220-230mm window, allowing precise end-position tuning without adding external stops.
This SKU features a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and includes a magnet (-S) for position detection. The extruded aluminum barrel houses sensor grooves on both sides, compatible with AirTAC CMSE reed and DMSE electronic solid-state switches. It supports a speed range of 30-800 mm/s and uses adjustable air cushions at both ends to decelerate the load smoothly.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S Is Used
Machine Changeover
Quickly fine-tune the 220-230mm end stop during product size transitions on a packaging line without replacing the cylinder.
End-Position Calibration
Dial in the exact retraction point during commissioning to perfect tooling alignment, avoiding the need for external mechanical stops.
Sensor-Driven Sorting
Leverage the integrated magnet with DMSE electronic sensors to confirm part ejection strokes within variable travel windows.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S the Right Cylinder?
Choose this 32mm bore when your application requires 563N of push force at 0.7 MPa; if you need less force, step down to a smaller bore, or step up to a 40mm bore (879N push at 0.7 MPa) for heavier loads. An adjustable stroke is ideal for machine setup and product changeovers, letting you dial in the exact 220-230mm end position at commissioning rather than swapping cylinders. For a direct ISO 15552 replacement match, specify the 32mm bore, 230mm stroke, 10mm adjustment, PT tapered port thread, and the -S magnet option. Since the nominal stroke is 230mm, ensure adequate external guiding to handle side loads over this travel distance.
Keep in mind the rear adjuster acts only as a travel stop and the air cushions manage deceleration; neither will hold the load without live air pressure. For load-holding requirements without continuous air, consider an AirTAC SAIL pneumatic lock, a BSAI clamp-lock cylinder, or an external pilot-operated check valve. This profile cylinder uses a reduced mounting set including Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S FAQ
At 0.5 MPa, this 32mm bore cylinder provides 402N of push force and 345N of pull force. At 0.7 MPa, the push force increases to 563N.
The rear adjuster screw allows you to shorten the nominal 230mm stroke by up to 10mm, creating a usable travel window of 220-230mm. It functions as a mechanical stop and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX230-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.