Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 300mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke300 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S
The AirTAC SAIJ32X300-10-S is a double-acting, single-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 290-300 mm usable travel window, letting you dial back the nominal 300 mm stroke by up to 10 mm during commissioning. In the 32 mm bore class, it delivers 402 N of push force and 345 N of pull force at 0.5 MPa. The extruded aluminum barrel includes sensor grooves on both sides, and this -S variant includes a magnet for position detection.
This model uses an SUS420J2 stainless steel rod (option A) for improved corrosion resistance over standard carbon steel. The rear adjuster acts purely as a travel stop to set deceleration and end positions; it does not hold the load without live air pressure. For position holding, a SAIL or BSAI lock cylinder is required. It features PT tapered port threads (G1/8) and operates at speeds between 30 and 800 mm/s.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S Is Used
End-Stop Calibration
Dial in the exact 290-300 mm retract position during machine commissioning without machining external stop blocks.
Product Changeover
Quickly adapt the cylinder travel for slightly different product lengths on a packaging line.
Fixture Positioning
Fine-tune the clamping reach on a 32 mm bore fixture where a fixed-stroke SAI cylinder would be too rigid.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S the Right Cylinder?
Choose this 32 mm bore adjustable cylinder when an application requires exact end-position tuning without adding external stops or swapping components. If your process needs more thrust, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Because the 300 mm stroke is relatively long for a 12 mm rod, an external guide is recommended to prevent excessive side-load wear on the seals.
To match this exact unit for an ISO 15552 dimensional replacement, specify: 32 mm bore, 300 mm stroke, 10 mm adjustment range, PT G1/8 port, Basic/FA/LB/TC/FTC/TCM1/TCM2 mountings, and a magnet for CMSE or DMSE sensors. The rear screw mechanism fine-tunes the retract end, functioning as a physical stop rather than a mechanical lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S FAQ
At 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At its maximum 1.0 MPa pressure, it can generate up to 82 kgf.
The rear adjusting screw acts as a physical stopper, allowing you to shorten the effective travel from 300 mm down to 290 mm. This provides a 10 mm tuning window for precise end-position setup without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX300-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.