Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 60mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke60 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S
The AirTAC SAIJ32X60-50-S is a double-acting, single-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It delivers 402N of push force at 0.5 MPa and features a 60mm nominal stroke that can be fine-tuned down by up to 50mm, creating a highly versatile 10-60mm usable travel window. This extreme adjustability allows you to dial in exact end positions during commissioning without swapping hardware.
This configuration includes a SUS420J2 stainless steel rod (material code A) for enhanced corrosion resistance and carries the -S magnet option for seamless integration with AirTAC CMSE reed and DMSE electronic sensors. Fluid is filtered air, operating pressure ranges from 0.15 to 1.0 MPa, and the extruded aluminum barrel features sensor grooves on both sides for flexible switch mounting.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S Is Used
Product Changeovers
Quickly adapt end-of-stroke positions from 10 to 60mm on packaging lines handling varying container sizes without changing the cylinder.
Machine Setup
Fine-tune the retract end position during initial commissioning to achieve precise sensor triggering and avoid mechanical hard stops.
Variable End Stops
Dial in the exact clamping depth on small assembly fixtures where a fixed 60mm stroke would apply too much travel.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S the Right Cylinder?
Choose this 32mm bore when you need 402N push force at 0.5 MPa with extreme setup flexibility. If your application requires less fine-tuning and higher thrust, stepping up to the 40mm bore yields 628N of push force. The rear adjuster on this SAIJ model acts purely as a mechanical stop for position tuning; it does not lock or hold the load without live air. For dead-end holding requirements, consider the SAIL or BSAI series. To match this ISO 15552 interchangeable cylinder exactly, specify the PT port thread, the -S magnet, and the SUS420J2 rod material. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S FAQ
The rear adjuster screw lets you shorten the effective stroke by up to 50mm. This turns the 60mm nominal stroke into a 10-60mm adjustable travel window, allowing precise end-position tuning at commissioning.
At 0.5 MPa operating pressure, it provides 402N of push force and 345N of pull force. At 0.7 MPa, the push force increases to 563N.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX60-50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.