Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-75S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX750-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 750mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke750 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-75S
The AirTAC SAIJ32X750-75-S is a double-acting, double-rod ISO 15552 profile cylinder featuring a rear stroke adjuster. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
This variant is equipped with a SUS420J2 stainless steel rod (code A) for improved corrosion resistance and ships with a magnet (-S) for use with CMSE reed and DMSE electronic sensors. It uses a PT G1/8 tapered port and relies on variable air cushions at both ends to decelerate the load smoothly.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-75S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 750 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-75S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-75S Is Used
Variable End-Stop Tuning
Dial in the exact retract position within the 675-750mm window during machine setup to accommodate varying product lengths without swapping hardware.
Product Changeover
Quickly adjust the stroke by up to 75mm on packaging lines when switching between different package sizes, minimizing downtime between production runs.
Long-Travel Assembly
Utilize the 750mm stroke for extended linear movements while relying on the rear screw to precisely set the final resting position for component placement.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-75S the Right Cylinder?
If your application requires less force, step down to a 25mm bore; if you need more thrust, stepping up to a 40mm bore yields 628N. The rear adjuster acts purely as a travel stop and does not hold the load without live air—use a SAIL or BSAI cylinder if you need true load-holding capability.
Because this model features a 750mm stroke, the 12mm rod requires external guiding to prevent excessive side-loading and binding over long unsupported travels. For a direct ISO 15552 dimensional replacement, match the 32mm bore, 750mm stroke, 75mm adjustment, PT G1/8 port, and -S magnet. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-75S FAQ
At its maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke from its 750mm nominal length down to 675mm. It only sets the travel end and decelerates the load via air cushions; it does not lock the position without continuous air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX750-75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.