Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32AX850-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 850mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke850 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10S
The AirTAC SAIJ32X850-10-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear mechanical stroke adjuster.
This variant features a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance and includes a magnet (-S) for use with CMSE reed or DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides, and the PT tapered port threads match the standard G1/8 fitting size for this bore.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10S Is Used
End-Stop Calibration
Dial in the exact 840-850mm retraction point during machine setup to compensate for mechanical tolerance without adding external stopper blocks.
Product Changeover
Quickly adjust the end-of-stroke position on a packaging line when handling different carton lengths, using the 10mm trim to fine-tune the motion.
Sensor Targeting
Leverage the integrated magnet with DMSE electronic sensors to confirm the adjusted position, ensuring the long 850mm travel completes accurately.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10S the Right Cylinder?
The 10mm rear adjuster acts purely as a travel stop for fine-tuning product changeovers, not as a load-holding brake. For position holding without live air pressure, consider an external rod lock or the AirTAC SAIL locking cylinder. To replace an ISO 15552 cylinder, match the 32mm bore, 850mm stroke, 10mm adjustment, PT port, and -S magnet.
Because the 850mm stroke is long relative to the 12mm rod diameter, it is critical to use an external guide to prevent excessive side-loading and rod bending. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10S FAQ
The maximum push force is 724N at 0.9 MPa.
The rear adjuster screw acts as a mechanical stop, allowing you to shorten the 850mm nominal stroke by up to 10mm, creating an effective travel window of 840-850mm. It does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32AX850-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.