Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 10mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke10 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S
The AirTAC SAIJ32X10-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to fine-tune the extend position within a 0-10 mm usable travel window. Delivering 402 N of push force at 0.5 MPa, it is built for light-duty positioning. The barrel is extruded aluminum with sensor grooves on both sides, and the rod is crafted from SUS304 stainless steel for superior corrosion resistance.
This adjustable-stroke model omits the FB, CA, CB, and CR mounting options, utilizing a reduced interface set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The PT tapered port and integrated magnet enable seamless use with AirTAC CMSE reed and DMSE electronic sensors for precise end-of-stroke detection.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S Is Used
Precise End-Stop Tuning
Dial in the exact extend position within a 0-10 mm window during machine commissioning without installing external physical stops.
Rapid Product Changeover
Quickly adjust the travel end to accommodate slightly different product sizes on automated assembly lines.
Light-Force Positioning
Leverage 402 N of push force at 0.5 MPa for delicate handling tasks requiring precise mechanical endpoints.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S the Right Cylinder?
Choose this 32 mm bore when you need exact end-position tuning at commissioning or during product changeovers without swapping the entire cylinder or adding bulky external stops. If your application requires greater thrust, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. The rear adjuster acts strictly as a travel stop and does not hold the load without live air; for true fail-safe holding, consider an external rod lock or the SAIL series.
As a dimensionally interchangeable ISO 15552 cylinder, it matches standard mounting footprints. To replicate this exact configuration, specify a 32 mm bore, 10 mm stroke, 10 mm adjustment range, PT port thread, Basic/FA/LB/TC/FTC/TCM1/TCM2 mounts, and the -S magnet option.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At the maximum operating pressure of 1.0 MPa, it delivers up to 80 kgf.
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 10 mm, providing a 0-10 mm usable travel window for fine-tuning without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX10-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.