Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 110mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke110 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100
The AirTAC SAIJ32X110-100 is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a usable travel window of 10 to 110 mm, allowing you to dial back the nominal 110 mm stroke by up to 100 mm during commissioning. In the 32 mm bore class, it delivers 402 N of push force and 345 N of pull force at 0.5 MPa.
This unit is built with a SUS304 stainless steel rod for superior corrosion resistance and features PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, though this specific SKU omits the internal magnet. Remember that the rear adjuster acts purely as a mechanical stop to fine-tune the end position, not as a lock to hold loads without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100 Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100 Is Used
Machine Setup Tuning
Dial in the exact end-of-stroke position during initial commissioning to accommodate sensor targets or mechanical stops without machining external spacers.
Product Changeover
Quickly adapt the cylinder's travel window from 10 to 110 mm on packaging lines handling varying package sizes, ensuring precise positioning for each new product run.
Variable End Stops
Use the 100 mm adjustment range to safely vary the clamping or pressing distance in light-force assembly stations, accommodating different workpiece heights.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100 the Right Cylinder?
Choose this 32 mm bore adjustable-stroke cylinder when your application requires precise end-position tuning at machine setup or during product changeover without swapping out the physical cylinder or adding external stops. If your process requires higher force, stepping up to the 40 mm bore yields 628 N of push force at 0.5 MPa. Because the 110 mm stroke is below the 300 mm threshold, side-load concerns are minimal, though the 12 mm rod and M10x1.25 thread still require standard alignment. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 options, omitting FB, CA, CB, and CR. For any load-holding requirements without continuous air pressure, consider the SAIL or BSAI series instead of relying on this adjuster.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100 FAQ
At a 0.5 MPa operating pressure, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. At the maximum 1.0 MPa pressure, it can deliver up to 82 kgf.
The rear adjuster screw allows you to shorten the effective travel from the nominal 110 mm down to as little as 10 mm. This creates a 10-110 mm usable stroke window, letting you fine-tune the retract end position without replacing the cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX110-100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.