Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-30S
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32BX260-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 260mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ32 mm
- Stroke260 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-30S
The AirTAC SAIJ32X260-30-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, allowing you to dial back the nominal 260 mm travel by up to 30 mm. This creates a usable 230-260 mm stroke window, allowing precise end-position tuning at commissioning without swapping out the cylinder or adding external stops.
This specific configuration features a SUS304 stainless steel rod (option B) for superior corrosion resistance and includes a built-in magnet for position sensing with AirTAC CMSE reed and DMSE electronic switches. The extruded aluminum barrel incorporates sensor grooves on both sides, and fluid supply is via PT tapered G1/8 ports. The rear adjuster acts purely as a mechanical stop to set the travel end; it does not hold the load without live air pressure.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-30S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 260 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×260 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-30S Is Used
Machine Setup & Changeover
Fine-tune the 230-260 mm travel window during product size changeovers on a packaging line without physically replacing the cylinder.
Variable End-Stop Positioning
Use the rear adjustment screw to set precise retract end-positions for different tooling heights or sensor targets on the fly.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-30S the Right Cylinder?
The adjustable stroke is highly beneficial for machine setups requiring variable end-stops or product-size changeovers, providing flexibility that a fixed-stroke SAI cylinder cannot match.
Because the total stroke is 260 mm, the 12 mm diameter rod and M10x1.25 thread should be guided externally if significant side loads are present to prevent uneven wear. Remember that the rear adjuster is a travel stop, not a locking device; the SAIJ will not hold its position without live air. For true fail-safe load holding, consider the SAIL or BSAI series instead. This SAIJ model uses a reduced mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2) and is dimensionally interchangeable per ISO 15552.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-30S FAQ
The rear adjuster screw allows you to shorten the effective travel by up to 30 mm from the 260 mm nominal stroke, providing a usable 230-260 mm window. It functions as a mechanical stop to decelerate the piston and does not lock the load without continuous air pressure.
The built-in magnet (-S) is fully compatible with AirTAC CMSE reed and DMSE solid-state sensors mounted in the dual-side barrel grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX260-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.