Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S
The AirTAC SAIJ32X600-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster, enabling you to dial back the nominal 600 mm travel to a precise 500-600 mm window. Delivering 402 N of push force at 0.5 MPa, it suits compact setups needing exact end-position tuning. The PT tapered port and M10x1.25 rod thread are standard for this 32 mm bore.
This variant includes a SUS304 stainless steel rod for corrosion resistance and an integrated magnet (-S) for CMSE or DMSE sensors. The extruded aluminum barrel provides sensor grooves on both sides. The rear adjuster acts purely as a travel stop for commissioning flexibility, not a load-holding lock.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S Is Used
Product Changeover
Fine-tune the retract end position by up to 100 mm during packaging format changes without replacing the cylinder.
Variable End-Stop Setup
Dial in the exact 500-600 mm travel distance at machine commissioning to perfect the timing of a delicate pick-and-place.
Adjustable Forming Stop
Use the rear stopper to alter the pressing depth for different material thicknesses on a single sliding fixture.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S the Right Cylinder?
Choose this 32 mm bore when an application requires a variable end-stop within a 500-600 mm travel window, avoiding the need to physically swap cylinders during product changeover. If your setup needs higher thrust, stepping up to a 40 mm bore yields 628 N at 0.5 MPa. For load-holding without live air pressure, the SAIJ adjuster will not suffice; consider an external rod lock or the SAIL series.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 600 mm stroke, 100 mm adjustment range, PT port, and the -S magnet. Because the stroke is 600 mm, the 12 mm rod diameter carries a higher risk of side-load buckling; always guide the load externally to prevent rod binding. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S FAQ
At 0.5 MPa, this 32 mm bore cylinder provides 402 N of push force and 345 N of pull force. It can reach up to 724 N of push force at 0.9 MPa.
The rear adjuster screw lets you mechanically shorten the effective travel from 600 mm down to 500 mm. It acts as a physical stop to tune the end position and does not lock the load without live air.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.