Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S
The AirTAC Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 600mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ32 mm
- Stroke600 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- CushionAdjustable, 27 mm
About the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S
The AirTAC SAIJ32X600-10-S is a double-acting ISO 15552 profile cylinder featuring a rear-mounted stroke adjuster. It provides a 590-600mm usable travel window, allowing you to dial back the end-of-stroke position by up to 10mm during commissioning without adding external stops. In the 32mm bore class, it generates 402N of push force and 345N of pull force at a 0.5MPa operating pressure.
This variant includes a SUS304 stainless steel rod for superior corrosion resistance and is equipped with a magnet for CMSE reed and DMSE electronic sensors. The extruded aluminum barrel incorporates sensor grooves on both sides. It uses a PT tapered G1/8 port and supports a speed range of 30-800mm/s, while the rear adjuster functions purely as a travel stop rather than a load-holding lock.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S Technical Specifications
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S Is Used
Machine Changeover
Dial in the exact 590-600mm end-position during product size changes without physically swapping the cylinder or adding mechanical shims.
Variable End-Stop
Provides a precise mechanical stop for a moving payload on a long 600mm travel axis, letting operators trim the final 10mm of travel mechanically.
Corrosive Setup
The SUS304 stainless rod supports reliable actuation in washdown or lightly corrosive manufacturing environments while maintaining fine stroke tuning.
Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S the Right Cylinder?
Choose this 32mm bore when your application requires 402N of push thrust at 0.5MPa; stepping up to the 40mm bore increases that force to 628N if your payload demands it. The 10mm adjustable end-stop is ideal for fine-tuning a 600mm stroke on product changeovers, offering more setup flexibility than a fixed SAI cylinder. Because the stroke is 600mm, the 12mm rod requires an external guide to prevent excessive side-loading on the piston. For true load-holding without live air pressure, select a SAIL or BSAI cylinder instead of relying on the rear stopper.
When replacing an ISO 15552 cylinder, match the 32mm bore, 600mm stroke, 10mm adjustment range, PT G1/8 port, and the -S magnet requirement. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting FB, CA, CB, and CR brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S FAQ
The rear adjuster acts as a mechanical stop that shortens the effective travel. For this model, it provides a 590-600mm usable window, allowing you to trim the stroke back by up to 10mm. It is a travel stop, not a lock, and does not hold the load without live air.
At a 0.5MPa operating pressure, this double-acting cylinder generates 402N of push force and 345N of pull force. It can reach up to 724N of push force at 0.9MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32BX600-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.