verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-40

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X115-40 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 115mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke115 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$65.36 $72.86Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-40

The AirTAC SAIJ32X115-40 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the nominal 115 mm travel back by up to 40 mm. This yields a usable end-position window of 75 to 115 mm, enabling precise tuning at commissioning without swapping out the barrel or adding external stops. It features a 12 mm carbon steel rod and a PT tapered G1/8 port.

It utilizes a reduced mounting subset of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement, though this non-magnet variant does not support internal sensing.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-40 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X115-40
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke115 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-40

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×115Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-40 Is Used

tune

Variable End-Stop Positioning

Dial in the exact retract distance between 75 and 115 mm during product size changeovers on packaging lines without machining new hard stops.

settings_input_component

Machine Setup Commissioning

Fine-tune the final end-of-stroke position during initial machine build to compensate for mechanical tolerance stack-up.

precision_manufacturing

Light-Duty Clamping

Apply up to 402 N of clamping force while adjusting the travel window on the fly to accommodate varying part thicknesses.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-40 the Right Cylinder?

Choose this 32 mm bore adjustable-stroke cylinder when your application requires fine-tuning of the retract end-position during machine setup or product changeover, rather than the fixed travel of a standard SAI model. If your process needs less push force, stepping down is not an option as 32 mm is the smallest size, but if you need significantly more force, the 40 mm bore offers 628 N at 0.5 MPa.

Because the rear adjuster acts purely as a mechanical stop and the air cushions only manage deceleration, this cylinder cannot hold a load without live air pressure. For load-holding requirements, consider the SAIL or BSAI series. When replacing an ISO 15552 cylinder, verify your exact 115 mm stroke, 40 mm adjustment range, PT port thread, and mounting interface.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-40 FAQ

At the maximum pressure of 1.0 MPa, it can deliver up to 82 kgf.

The rear adjuster screw acts as a mechanical stop that can shorten the nominal 115 mm stroke by up to 40 mm, giving an effective travel range of 75 to 115 mm. It only sets the end position and does not lock the load without live air pressure.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X115-40

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X115-40 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.