verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-20

The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X140-20 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 140mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke140 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$67.22 $74.72Save 10% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SAIJ32 stroke, mounting and version on one page All SAIJ32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-20

The AirTAC SAIJ32X140-20 is a double-acting ISO 15552 profile cylinder with a 32mm bore and a 140mm nominal stroke. An integrated rear adjusting screw allows you to fine-tune the effective travel down by up to 20mm, creating a precise 120-140mm usable stroke window. This on-machine adjustability is ideal for dialing in end positions during commissioning without adding external stops. The extruded aluminum barrel features sensor grooves on both sides for straightforward detection mounting.

The G1/8 PT port supplies air to the variable air cushions at both ends to decelerate the load. The rear adjuster acts purely as a travel stop and does not hold the load without live air pressure; for true load-holding, consider the SAIL or BSAI series.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-20 Technical Specifications

ModelAirtac Adjustable Cylinder SAIJ32 SAIJ32X140-20
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke140 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-20

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×140Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-20 Is Used

tune

Machine Setup Tuning

Dial in the exact 120-140mm end position during commissioning without swapping cylinders or fabricating external stopper blocks.

view_module

Product Size Changeover

Quickly adjust the retract stop on packaging lines when handling slightly different package lengths on the same conveyor.

precision_manufacturing

End-Position Trimming

Trim back the nominal 140mm stroke by up to 20mm to compensate for mechanical wear or sensor drift over time.

Is the Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-20 the Right Cylinder?

Choose the SAIJ adjustable-stroke variant over a fixed SAI cylinder when you need variable end-stops for product changeovers or fine-tuning at machine setup. The SAIJ mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR brackets. Ensure a dimensionally interchangeable ISO 15552 replacement by matching the 32mm bore, 140mm stroke, 20mm adjustment, PT G1/8 port, and standard carbon steel rod without a magnet.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-20 FAQ

It features a rear adjusting screw that acts as a mechanical stop, allowing you to shorten the 140mm stroke by up to 20mm. This provides a usable travel window of 120-140mm, which can be fine-tuned during commissioning without replacing the cylinder.

At the maximum operating pressure of 1.0MPa, the push force reaches 80kgf.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac Adjustable Cylinder SAIJ32 SAIJ32X140-20

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SAIJ32X140-20 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.