
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X15-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 15mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X15-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 5 to 15 mm, letting you dial in the exact end position without swapping hardware.
This unit includes a magnet for CMSE reed and DMSE electronic sensors, utilizing dual-sided sensor grooves on the extruded aluminum barrel. It supports a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2. The PT tapered port and carbon steel rod ensure robust, standard pneumatic integration.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X15-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 5 to 15 mm travel window to grip delicate electronic components without crushing them during automated assembly.
Fine-tune the retract end position during initial commissioning to perfectly align small pneumatic pick-and-place movements.
Quickly adjust the stroke stop on packaging lines when switching between different small product sizes without changing the cylinder.
The rear adjuster acts purely as a mechanical stop for fine-tuning at commissioning; it is not a lock, so the cylinder will not hold a load without live air. For load-holding without pressure, consider an external rod lock or the AirTAC SAIL series.
To replace an ISO 15552 cylinder, match the 15 mm stroke, 10 mm adjustment, PT port, and mounting style. The 12 mm rod and M10x1.25 thread handle moderate side loads, though any long unsupported stroke still needs an external guide.
Quick checklist
The rear adjusting screw acts as a mechanical stop, allowing you to shorten the 15 mm nominal stroke down to a 5 mm minimum. This creates a 5 to 15 mm usable travel window for fine-tuning without adding external stops.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.