
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X155-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 155mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X155-100-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It features a carbon steel piston rod and a PT tapered port thread. Because this specific SKU carries a 100 mm adjustment code, you can dial back the nominal 155 mm stroke to create a highly flexible 55-155 mm usable travel window.
The integrated magnet works seamlessly with AirTAC CMSE reed and DMSE solid-state sensors, while the extruded aluminum barrel includes sensor grooves on both sides. Remember that the rear adjuster acts only as a mechanical stop for deceleration, not as a load-holding lock.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X155-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact end-position during commissioning or product changeover using the 55-155 mm travel window, eliminating the need for external stopper blocks.
Ideal for test fixtures and assembly stations where the effective stroke length must be frequently modified to accommodate different part depths.
Provides 402 N of precise clamping force at 0.5 MPa, with an integrated magnet for DMSE solid-state sensors to confirm end-of-travel.
Choose this SAIJ32X155-100-S variant when your application requires frequent product-size changeovers or variable end-stops without swapping the cylinder. The 100 mm adjustment range allows massive on-the-fly stroke modifications at commissioning.
Because the standard SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2 (omitting FB, CA, CB, and CR), you can easily match your ISO 15552 footprint. For any load-holding requirements without live air pressure, skip this cylinder and look at the SAIL or BSAI series, as the adjuster here does not lock the load.
Quick checklist
The maximum operating pressure is 1.0 MPa.
The rear external adjusting screw acts as a mechanical stop, allowing you to shorten the effective stroke from the nominal 155 mm down to as little as 55 mm. This provides a 55-155 mm adjustable travel window for fine-tuning end positions without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.