
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-100S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X180-100-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. By turning the rear stopper screw, you can trim the nominal 180mm travel back by up to 100mm, creating a wide 80-180mm usable stroke window for highly flexible end-position tuning.
This adjustable-stroke design eliminates the need to swap cylinders or bolt on external stops during machine setup or product changeovers. It includes a magnet for use with AirTAC CMSE reed and DMSE solid-state sensors, and features variable air cushions at both ends. The extruded aluminum barrel includes sensor grooves on both sides, and the unit accepts PT (tapered) port threads matched to its G1/8 interface.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-100S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact 80-180mm stroke window on packaging lines switching between box sizes without physically swapping out the actuator.
Fine-tune the final retract position during commissioning to perfect a pressing or clamping operation, avoiding the cost of custom-length cylinders.
Adjust the rejection stroke distance on the fly for different product lengths moving down a conveyor, ensuring precise physical ejection.
If you need less force, stepping down is not an option in the ISO 15552 standard profile series below 32mm, but if you require greater thrust, the 40mm bore provides 628N at 0.5 MPa. The massive 100mm adjustment range on this specific SKU is ideal for prototyping or lines running multiple product sizes, allowing you to dial in the exact 80-180mm stroke without changing the mounting footprint.
When replacing an ISO 15552 cylinder, match the 32mm bore, 180mm nominal stroke, PT port threads, and the -S magnet requirement. Keep in mind the rear adjuster and air cushions only decelerate the load; they do not hold it without live air. If you need true fail-safe load holding, use an external pilot-operated check valve or select the AirTAC SAIL or BSAI series. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
It features an external adjusting screw at the rear that acts as a mechanical stop. For this model, you can shorten the effective stroke by up to 100mm, giving you an adjustable travel window of 80 to 180mm without replacing the cylinder.
At 0.9 MPa, the push force increases to 724N.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.