
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X180-30 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 180mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X180-30 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to trim the effective travel back by up to 30 mm. This creates a usable 150-180 mm travel window, enabling fine end-position tuning at commissioning without swapping the barrel or adding external stops.
The rear adjuster acts purely as a mechanical stop and works alongside the 27 mm variable air cushions at both ends to decelerate the travel. It does not hold the load without live air pressure. The extruded aluminum barrel includes sensor grooves on both sides for CMSE reed or DMSE solid-state sensors, though this standard configuration omits the magnet. It uses a PT tapered port and a 12 mm carbon steel rod with an M10x1.25 thread.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X180-30 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 150-180 mm travel window during product size changes to set new end positions without physically swapping the cylinder.
Fine-tune the retract end position during initial setup to compensate for mechanical tolerances without adding external stopper blocks.
Choose this 32 mm bore adjustable-stroke cylinder when your machine setup requires a variable end-stop rather than the fixed travel of a standard SAI model. The 12 mm rod and M10x1.25 thread handle basic side loads, but always verify guiding on longer strokes.
When replacing an ISO 15552 cylinder, match the 32 mm bore, 180 mm nominal stroke, 30 mm adjustment, PT port, and the SAIJ mounting set (Basic, FA, LB, TC, FTC, TCM1, TCM2). Note that this mounting set omits FB, CA, CB, and CR options. For any load-holding requirements without live air pressure, the rear stop is insufficient; consider the SAIL air-released lock or BSAI clamp-lock cylinder instead.
Quick checklist
The maximum push force is 724 N at 0.9 MPa.
The rear adjuster screw allows you to shorten the 180 mm nominal stroke by up to 30 mm, creating a usable travel window of 150-180 mm. This mechanical stopper sets the end position but does not lock the load without live air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.