
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X195-50S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 195mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X195-50-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 195 mm stroke that can be fine-tuned down by up to 50 mm, yielding a usable travel window of 145-195 mm.
This adjustable-stroke variant utilizes a carbon steel piston rod with an M10x1.25 thread, designed to handle standard operational side loads. The extruded aluminum barrel features dual sensor grooves, and because this unit includes a magnet (-S), it directly supports AirTAC CMSE reed and DMSE electronic solid-state switches for precise position detection.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X195-50S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 145-195 mm travel window during production line changeovers to accommodate varying package lengths without changing hardware.
Fine-tune the retract end-position at commissioning to achieve exact positioning, using the rear stopper instead of installing costly external mechanical stops.
Adjust the effective stroke on the fly for assembly stations that need to press or handle components of slightly different heights.
If your setup demands higher thrust, stepping up to the 40 mm bore yields 628 N. The 50 mm adjustment range is perfect for machine changeovers, allowing you to shift the end position without physically swapping the cylinder or adding external stops. For strokes of 195 mm, ensure external guides are used if the load is heavy or unsupported.
When specifying an ISO 15552 replacement, match the 32 mm bore, 195 mm stroke, 50 mm adjustment, PT G1/8 port, and the -S magnet requirement. Remember that the rear adjuster functions strictly as a travel stop, not a lock; the SAIJ32X195-50-S cannot hold a load without continuous live air. For load-holding needs, consider the SAIL or BSAI series. Mounting options are limited to Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Quick checklist
The rear adjuster acts as a mechanical stop that allows you to shorten the effective stroke by up to 50 mm. This creates a usable travel window of 145-195 mm from the 195 mm nominal stroke, enabling fine-tuning without swapping the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.