
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X20-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 20mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X20-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a usable travel window of 10 to 20 mm, allowing you to dial in the exact end position without adding external stops.
Unlike a fixed-stroke SAI unit, this model lets you trim up to 10 mm of travel during commissioning. The extruded aluminum barrel includes sensor grooves on both sides, ready for CMSE reed or DMSE electronic switches if a magnet is added later. It uses a PT tapered port thread and a standard carbon steel piston rod for reliable daily operation.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X20-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within a 10 to 20 mm window during machine commissioning without installing external physical stops.
Quickly adapt the cylinder stroke for varying product sizes on a packaging line by adjusting the rear stopper screw.
Apply 402 N of clamping force in tight assemblies where a short, adjustable stroke is required for delicate operations.
Choose this 32 mm bore when your application requires a short 10 to 20 mm stroke and moderate force. The adjustable stroke is perfect for product changeovers, letting you fine-tune the retract position on the fly instead of swapping cylinders.
Since this is a standard double-acting cylinder, the rear adjuster acts only as a travel stop and does not hold the load without live air. For fail-safe load holding, consider the SAIL or BSAI series instead. This SAIJ32X20-10 is dimensionally interchangeable with ISO 15552 cylinders and supports Basic, FA, LB, TC, FTC, TCM1, and TCM2 mounts.
Quick checklist
The rear adjuster screw acts as a mechanical stop that lets you shorten the effective stroke by up to 10 mm. This creates a usable travel window of 10 to 20 mm, allowing precise end-position tuning without replacing the cylinder.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.