
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X210-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X210-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. This wide tuning band is ideal for dialing in exact end positions during machine commissioning without swapping out the physical cylinder.
Unlike fixed-stroke SAI models, this SKU uses a rear stopper screw to set the retract position. The adjuster acts solely as a travel stop and does not hold the load without live air pressure. For position holding, you need a SAIL or BSAI lock cylinder. This version includes a magnet for CMSE reed and DMSE electronic sensors, uses a PT tapered port, and omits FB, CA, CB, and CR mountings.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X210-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the exact retract distance within the 135-210mm window during machine setup to perfect product handling without adding external stops.
Quickly adapt the cylinder stroke on the line when switching between different product sizes, leveraging the full 75mm adjustment range.
Provide precise pressing and clamping forces up to 402N at 0.5MPa while fine-tuning the end stop to accommodate varying component heights.
If your application requires less fine-tuning, a smaller 10mm or 20mm adjuster might suffice, but this 75mm window is excellent for product-size changeovers. If you need higher force, step up to the 40mm bore, which provides 628N at 0.5MPa.
Because the 210mm stroke exceeds 300mm when combined with the 75mm adjustment, you must account for potential side-loading. The 12mm carbon steel rod and M10x1.25 thread handle moderate loads, but long unsupported strokes still require an external guide to prevent premature wear. To replace an ISO 15552 cylinder, match the 32mm bore, 210mm stroke, PT G1/8 port, and Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting.
Quick checklist
The rear adjuster screw lets you shorten the effective stroke by up to 75mm. This means the 210mm nominal stroke can be dialed back to any travel distance between 135mm and 210mm to fine-tune the end position.
The maximum operating pressure is 1.0MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.