
The AirTAC Adjustable Cylinder SAIJ32 SAIJ32X220-75S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 220mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAIJ32X220-75-S is a double-acting, double-rod ISO 15552 profile cylinder equipped with a rear stroke adjuster. It provides a nominal 220 mm stroke that can be fine-tuned backward by up to 75 mm, creating a highly flexible 145-220 mm usable travel window.
This variant includes a built-in magnet for position sensing with AirTAC CMSE reed or DMSE electronic switches, and features a standard carbon steel rod with PT tapered port threads. The rear adjuster acts purely as a mechanical stop for end-position tuning and does not hold the load without live air pressure. For load-holding requirements, an external pilot-operated check valve or a SAIL locking cylinder is required.
| Model | Airtac Adjustable Cylinder SAIJ32 SAIJ32X220-75S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Dial in the 145-220 mm travel window during format size changes on a packaging line without replacing the cylinder.
Fine-tune the retract end-position to perfectly meet the workpiece, preventing impact damage during initial machine setup.
Use the 75 mm rear screw to adjust the effective stroke dynamically for testing different actuation distances in assembly fixtures.
Choose this 32 mm bore when an application requires precise end-position tuning during commissioning or product changeover, avoiding the need to swap cylinders or bolt on external stops. If your setup needs less force, stepping down is not an option below 32 mm in this series, but stepping up to a 40 mm bore increases push force to 628 N at 0.5 MPa. Because the 220 mm stroke exceeds 300 mm? No, but for any long stroke, ensure external guides support the load to prevent side-load damage to the 12 mm rod.
To match this ISO 15552 dimensionally interchangeable cylinder, confirm the 220 mm stroke, 75 mm adjustment range, PT G1/8 port, and -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, deliberately omitting FB, CA, CB, and CR brackets. The standard speed range is 30-800 mm/s.
Quick checklist
At its maximum 1.0 MPa pressure, it achieves 82 kgf.
The rear adjuster screw allows you to shorten the effective travel from the 220 mm nominal stroke by up to 75 mm, providing a usable stroke window of 145 to 220 mm. The adjuster is a mechanical stop, not a lock, so it cannot hold the load without continuous air pressure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.